Project Mirabel towers, Vancouver

Mirabel towers

Vancouver, Canada

Mirabel towers

Ref #: 8

Category: RESIDENTIAL


Yard	Exterior/interior concrete surface preparation, leveling, installation of ceramic tile, with sound-reduction and formed concrete balconies
Location	Vancouver, Canada
Subcategory	Residence
Built in	2021
Application	Products from MAPEI’s Concrete Restoration Systems line were crucial in the construction of new-build twin towers of refined estate homes and penthouse residences located in Vancouver's scenic West End
Start and finish date	2020/2021
Application Type	Concrete Restoration Systems, New Building
Client	Marcon Construction
Contractor company	Marcon Construction
Installer companies	Robertson Floors Ltd.
MAPEI Distributor	Prosol inc. and Central Concrete Accessories
Photographer	Take Off Photography
MAPEI Coordinator	Dave Randall and Anthony Petrunia
Other	Architect: Richard Henriquez

Products used for the project

Keraflex SG

Keraflex SG is a standard-grade, versatile, large-and-heavy-tile mortar and thin-set mortar for tile and stone installations on floors, walls and countertops. It is formulated as nonsag for walls and…

Keraflex SG is a standard-grade, versatile, large-and-heavy-tile mortar and…

Mapecem Quickpatch

Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces. This product features a very low emission of volatile organic compounds and…

Mapecem Quickpatch is a high-performance, fast-setting, cementitious material…

Mapeguard 2

Mapeguard 2 is a next-generation, flexible, thin, 40-mil (1-mm) lightweight, load-bearing, fabric-reinforced “peel-and-stick” crack-isolation, waterproofing and vapor-control membrane. Mapeguard 2…

Mapeguard 2 is a next-generation, flexible, thin, 40-mil (1-mm) lightweight,…

MAPEI SM Primer

MAPEI SM Primer is a ready-to-use, fast-drying, water-based, latex primer for use under MAPEI’s peel-and-stick sheet membranes on residential and commercial indoor or outdoor floors. MAPEI SM Primer…

MAPEI SM Primer is a ready-to-use, fast-drying, water-based, latex primer for…

Mapelastic AquaDefense

Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial…

Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely…

Mapesil T Plus

Mapesil T Plus is a professional-grade, 100%-silicone sealant with enhanced adhesion for use on multiple substrates. This product is specifically formulated for heavy traffic and expansion/movement…

Mapesil T Plus is a professional-grade, 100%-silicone sealant with enhanced…

Novoplan 2 Plus

Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix for interior concrete and engineer-approved floors.

Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment…

Planigrout 755

Planigrout 755 is a one-component, nonmetallic, nonstaining, nonshrinking, cementitious construction grout consisting of select fine aggregates and special additives. Planigrout 755 requires only the…

Planigrout 755 is a one-component, nonmetallic, nonstaining, nonshrinking,…

Planitop X

Planitop X is a one-component, fiber-reinforced, shrinkage-compensated, high-early-strength, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor.

Planitop X is a one-component, fiber-reinforced, shrinkage-compensated,…

Primer L

Primer L is a concentrated, solvent-free acrylic primer used before the installation of underlayment materials. It is green for easy identification. Primer L improves the bond between a properly…

Primer L is a concentrated, solvent-free acrylic primer used before the…

Topcem Premix

Topcem Premix is an accelerated-cure screed mortar suitable for bonded as well as unbonded applications. Topcem Premix can easily be screeded or sloped, and has the workability and working time of…

Topcem Premix is an accelerated-cure screed mortar suitable for bonded as well…

Ultracolor Plus FA

Ultracolor Plus FA – with DropEffect ™ technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent,…

Ultracolor Plus FA – with DropEffect ™ technology and CO 2 emissions fully…

Ultraflex RS

Ultraflex RS is a premium-grade, single-component, high-performance, polymer-modified, rapid-setting thin-set mortar for interior and exterior installations of tile. This mortar has a high content…

Ultraflex RS is a premium-grade, single-component, high-performance,…

Mirabel towers

Products used for the project

Keep in touch

Mirabel towers

Construction

Additional Attachments

Products used for the project

Keep in touch