TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV FIBER with 13.5-14.5 parts of water. Pot life of mix: approximately 20 minutes (at +20°C). Minimum…
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts…
Two-component multipurpose epoxy formulated for industrial floors in compliance with standards applied to the drinks and foodstuffs industry and clean rooms. Some application examples: Coating floors…
Two-component multipurpose epoxy formulated for industrial floors in compliance…
TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature range: from -5°C to +30°C Packaging: – rolls 120 mm wide by 50 m long; – rolls 120 mm wide by 10 m long; – 90° and 270°…
TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature…
Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…
Synthetic rubber latex admixture to improve mechanical strength of cementitious…
Superfluid epoxy resin for injection. Epojet is used for monolithic repair of structures which have cracked due to overloading, impact, earthquakes etc; it is also used for bonding and structural…
Superfluid epoxy resin for injection. Epojet is used for monolithic repair of…
Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part product based on epoxy resins, special hardeners, selected fine aggregate and special additives. Adesilex PG1 hardens in…
Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part…
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.02. Dry solids content (EN ISO 3251) (%): approx. 5. Dilution rate: supplied ready to use.…
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO…
Where to use: • Waterproofing indoor floor and wall surfaces that are not subject to rising damp or in permanent water immersion. • Flexible, anti-fracture membrane. Apply before the installation of…
Where to use: • Waterproofing indoor floor and wall surfaces that are not…
ANTIRADICE LIGHT P is a prefabricated ELASTOMERIC-PLASTOMERIC membrane offering good performance, by virtue of a higher percentage of polymers such as POLYPROPYLENE (APP) and POLYOLEFIN (APAO). Its…
ANTIRADICE LIGHT P is a prefabricated ELASTOMERIC-PLASTOMERIC membrane offering…
Cold flexibility: -20°C ELASTOFLEX SA P is a top-quality prefabricated SELF-ADHESIVE bitumen membrane produced using ADESO® technology, the innovative ELASTOMERIC (SBS) compound laminating system. In…
Cold flexibility: -20°C ELASTOFLEX SA P is a top-quality prefabricated…
Cold flexibility: -20°C ELASTOBOND S6 P is a prefabricated ELASTOMERIC waterproofing membrane offering excellent performance. Made from a special modified distilled bitumen compound with a high…
Cold flexibility: -20°C ELASTOBOND S6 P is a prefabricated ELASTOMERIC…
TREND HS and TREND HS MINERAL are prefabricated waterproof plastomeric membranes capable of offering excellent performance. They are made from a POLYPROPYLENE-modified distilled bitumen compound and…
TREND HS and TREND HS MINERAL are prefabricated waterproof plastomeric…
Planiprep Fix is an ultra-fast drying, fine-grained, thixotropic, cementitious skimcoat compound for the repair and levelling of interior substrates, including, floors and steps. Planiprep Fix can be…
Planiprep Fix is an ultra-fast drying, fine-grained, thixotropic, cementitious…
TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix: transparent or coloured. Consistency of mix: fluid. Density of mix (kg/m³): 1,065-1,095. Abrasion…
