TECHNICAL DATA: Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of aggregates (diameter from 0 to 8 mm) and with 80-160 kg of water according to the moisture content of the inerts.…
TECHNICAL DATA: Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of…
Pre-applied, fully bonded, self-adhering, HDPE waterproofing membrane to protect against water underground structures Where to use: Horizontal and vertical waterproofing prior to pouring concrete in…
A high quality elastomeric flat roof waterproofing membrane made of a latest generation distilled bitumen based compound and thermoplastic elastomeric resin (SBS) Where to use: ELASTOSHIELD TS4 AF P…
A high quality elastomeric flat roof waterproofing membrane made of a latest…
Rapid Level CT 3220 is a rapid setting smoothing/levelling compound for levelling differences in thickness between 3mm to 20mm in one application. It allows the installation of ceramic, porcelain and…
Rapid Level CT 3220 is a rapid setting smoothing/levelling compound for…
TECHNICAL DATA: Pot life of mix: 50 minutes. Open time: ≥ 30 minutes. Grouting of joints: – on walls: after 2-3 hours. – on floors: after 2-3 hours. Set to light foot traffic: 2-3 hours. Ready for…
TECHNICAL DATA: Pot life of mix: 50 minutes. Open time: ≥ 30 minutes. Grouting…
One-component, solvent-free polyurethane adhesive with a very low emission level of volatile organic compounds for bonding pre-finished, multi-layered parquet.
One-component, solvent-free polyurethane adhesive with a very low emission…
MAPELASTIC AQUADEFENSE is a ready to use rapid-drying liquid membrane for waterproofing damp areas such as bathrooms, showers, laundries, saunas, balconies and terraces before installing dressing…
MAPELASTIC AQUADEFENSE is a ready to use rapid-drying liquid membrane for…
TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…
TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…
TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with 26-27 parts of water. Pot life of mix: 20-30 minutes (at +20°C). Minimum applicable thickness: 1…
TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts…
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene…
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane…
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV with 12-13 parts of water. Pot life of mix: 15 minutes (at +20°C). Minimum applicable thickness: 1 cm.…
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts…
TECHNICAL DATA: Maximum dimension of aggregate: 2 mm. Mixing ratio: comp. A : comp. B : comp. C = 16 : 6 : 100. Pot life of mix: 1 hour (at 23°C). Maximum applicable thickness: 5 cm per layer.…
TECHNICAL DATA: Maximum dimension of aggregate: 2 mm. Mixing ratio: comp. A :…
