Admixture for cementitious mortar and smoothing compounds. TECHNICAL DATA: Consistency: thick liquid. Colour: white. Dilution rate: with water at a ratio of 1 : 4 - 1: 5 for priming. Storage: 12…
Admixture for cementitious mortar and smoothing compounds. TECHNICAL DATA:…
Hydro-expanding bentonite jointing material for sealing construction joints. TECHNICAL DATA: Shape: pre-formed tape. Size: 20x25 mm. Storage: 24 months. Application temperature range: from -5°C to…
Hydro-expanding bentonite jointing material for sealing construction joints.…
Solvent-free, one component polyurethane binder for mixing drainage mortar and grout for paved floors. Applications: - Creation of mortar drainage beds with a minimum thickness of 2 cm, for laying…
Solvent-free, one component polyurethane binder for mixing drainage mortar and…
High-strength, cementitious sulphate binder for making fluid slurry and/or super-fluid injection mortar. Stabilcem ARS is used for making fluid slurry, mortar and beton applied by injection or…
High-strength, cementitious sulphate binder for making fluid slurry and/or…
Adhesive in water dispersion with strong, rapid initial hold, with very low emission of volatile organic compounds (VOC) for vinyl floorings. TECHNICAL DATA: Consistency: creamy paste. Colour: beige.…
Adhesive in water dispersion with strong, rapid initial hold, with very low…
Chloride-free antifreeze for cementitious mortar and concrete. Antifreeze S is used to prepare mortar and concrete (including reinforced) for use at ambient temperature as low as to –10°C. Antifreeze…
Chloride-free antifreeze for cementitious mortar and concrete. Antifreeze S is…
Three-component acid and wear-resistant epoxy mortar for floors. TECHNICAL DATA: Mixing ratio: A/B/C = 7.5/2.5/90. Consistency of mix: damp sand. Application temperature range: from +5°C to +30°C.…
Three-component acid and wear-resistant epoxy mortar for floors. TECHNICAL…