One component, ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide subject to light stresses. Applications: Drainage grouting of paved surfaces…
One component, ready-to-use polybutadiene-based drainage mortar for grouting…
Solvent-free, one component polyurethane binder for mixing drainage mortar and grout for paved floors. Applications: - Creation of mortar drainage beds with a minimum thickness of 2 cm, for laying…
Solvent-free, one component polyurethane binder for mixing drainage mortar and…
Adhesive in water emulsion for bonding parquet on cementitious screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM or TOPCEM PRONTO, wooden substrates, chip-board and heated floors. TECHNICAL DATA:…
Adhesive in water emulsion for bonding parquet on cementitious screeds made…
Two-component, epoxy-polyurethane adhesive for bonding all types and sizes of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM or TOPCEM PRONTO, cementitious screeds, old wooden, ceramic,…
Two-component, epoxy-polyurethane adhesive for bonding all types and sizes of…
Ready-to-use synthetic resin based solvent primer for bonding with Adesilex PA. Where to use: Preparation of substrates before the laying of wooden flooring with Adesilex PA adhesive. Primer PA dries…
Ready-to-use synthetic resin based solvent primer for bonding with Adesilex PA.…
Adhesive based on synthetic resins in alcohol for bonding wooden flooring. Where to use: Bonding of: - wood-back strips and mosaic wooden flooring; - all types of wooden strips and blocks; - small…
Adhesive based on synthetic resins in alcohol for bonding wooden flooring.…
Vinyl acetate adhesive in water dispersion for bonding felt, wood and wood derivatives, cardboard and paper. ADESIVIL can also be used also as a primer for very absorbent substrates or uneven…
Vinyl acetate adhesive in water dispersion for bonding felt, wood and wood…
Two-component epoxy adhesive for the installation of rubber flooring. Where to use: Bonding of: - tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and…
Two-component epoxy adhesive for the installation of rubber flooring. Where to…
Two-component, low-viscosity polyurethane adhesive with no water or solvents for bonding PVC and rubber floors on Internal and external surfaces. Technical data: Consistency: comp. A: thick paste;…
Two-component, low-viscosity polyurethane adhesive with no water or solvents…
