Project Pannon University Institute of Physical Education and Sports, Strengthening Hall, Veszprém

Pannon University Institute of Physical Education and Sports, Strengthening Hall

Veszprém, Hungary

Ref #: 602021

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Installation of ceramic tiles on 102 square meters, installation of floors on 390 square meters.
Location	Veszprém, Hungary
Subcategory	UNIVERSITY
Application	Installation of ceramic tiles and installation of floors.
Start and finish date	2021
Application Type	Installation of floors, Waterproofing systems
Contractor company	Ökoházak Kft.
Installer companies	Ökoházak Kft.
MAPEI Distributor	Stavmat, Veszprém
Credits	Mário Bere
MAPEI Coordination	András Doma

Product used for the project

EPOJET

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPEBAND PE 120

PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature range: from -5°C to +30°C Packaging: – rolls 120 mm wide…

PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA:…

MAPEFLOOR FINISH 630

Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B: = 10 : 0.15. Colour of mix:…

Two-component, protective acrylic filming agent in water dispersion for…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

ULTRAPLAN ECO

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with a very low emission level of volatile organic compounds (VOC). TECHNICAL DATA: Where to use: internal…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1…