Aquaflex Roof Premium, a ready-to-use liquid waterproofing membrane from Mapei

 28 March 2019. 06:09 AM

2 3 Aquaflex Roof Premium is a ready-to-use liquid waterproofing membrane, solvent-free and without VOC, formulated by the MAPEI R&D laboratories. Once applied, Aquaflex Roof Premium forms a seamless membrane with 400% elongation capacity that is resistant to atmospheric agents, UV rays and ponding water. Also, thanks to the special fillers contained in Aquaflex Roof Premium, it is resistant to foot traffic and may be applied on all walkable areas without an additional protective layer. Aquaflex Roof Premium adheres extremely well to numerous types of substrate and, thanks to its excellent elasticity and crack-bridging capacity (more than 30 min when reinforced with Mapetex 50), it is resistant to dynamic loads and stresses which normally act on roof structures. The excellent mechanical characteristics of Aquaflex Roof Premium remain stable over the years which make the product highly durable.

WHERE TO USE

For waterproofing:

  • Flat, sloping and curved roofs and roofs with a complex shapes;
  • New and existing roofs;
  • Terraces, balconies, walkways and walkable areas in general.

 

Aquaflex Roof Premium may be applied on:

  • Concrete;
  • Cementitious screeds and screeds made using special binders (Topcem or Topcem Pronto);
  • Ceramic and stone tiles;
  • Fibre cement slabs;
  • Existing bituminous membranes;
  • Galvanized sheet, copper, aluminium, steel and iron

ADVANTAGES:

  • High elongation
  • Resistant to UV rays
  • Resistant to ponding water
  • Excellent elasticity and crack-bridging
  • Perfect adhesion to substrates
  • SRI (Solar Reflectance Index) 103
  • Solvent-free and no VOC
  • CE-Certified in compliance with EN 1504-2
1 7 4

Technical Data

 

Product Identity

 

Consistency

Paste

Density (g/cm3)

1.25

Dry solids content (%)

60

Brookfield viscosity (mPa-s)

20,000

Application Data

 

Application temperature

+50C - +350C

Waiting time at +230C – 50% RH

  • Mapecoat I 600W and 1st coat approx. 3-4 hrs or Primer for Aquaflex and 1st coat, approx.. 5-6 house
  • -- each coat of Aquaflex Roof Premium: approx.. 2 hours
  • Set to foot traffic: approx.. 24 hours

Waiting time at +50C – 50% RH

  • Mapecoat I 600 W and 1st Coat: approx. 24 hours or Primer for Aquaflex and 1st coat : approx.. 24 hours
  • Each coat of Aquaflex Roof Premium: approx. 24 hours
  • Set to foot traffic: approx. 48 hours

Waiting time at +350C – 50% RH

  • Mapecoat I 600 W and 1st coat : approx. 1-2 hours or Primer for Aquaflex and 1st coat: approx. 2-4 hours
  • Each coat of Aquaflex Roof Premium: approx. 1 hour
  • Set to foot traffic: approx.. 24 hours

Mechanical Characteristics

 

Elongation at failure at +230C = 50% RH (ISO 37) (%)

400

Tensile strength at +230C – 50% RH (ISO 37) (N/mm2)

4

Comments

Load more comments

Login or Register
to MyMapei Area to insert your comment

Keep in touch

Subscribe to our newsletter to get Mapei news