Aluminium angle irons incorporated alkali resistant with glass fibre mesh. Aluminium elements used to finish off and reinforce the corners of panels used for thermal cladding systems. After bonding…
Aluminium angle irons incorporated alkali resistant with glass fibre mesh.…
Nylon fixing wallplug provided with hardboard screw in zinc and chromium-plated steel. Nylon wallplug provided with a flathead, cross-slotted type hardboard screw in zinc and chromium-plated steel…
Nylon fixing wallplug provided with hardboard screw in zinc and chromium-plated…
One-component primer for polyurethane sealants for absorbent substrates. Technical data: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Consumption: 6-9 g/m (1 cm - deep…
One-component primer for polyurethane sealants for absorbent substrates.…
Ready to use polyrethane one-component, solvent-free, elastic, adhesive with very low emission of volatile organic compounds, for all types of wood and laminated flooring.
Ready to use polyrethane one-component, solvent-free, elastic, adhesive with…
Two-component cement mortar for concrete finishing Where to use For superficial protection and levelling of concrete surfaces. Consumption 2 kg/m2 per mm of thickness. Packaging Units of 30.5 kg…
Two-component cement mortar for concrete finishing Where to use For superficial…
Fluid epoxy impregnator in water dispersion for consolidating and priming wooden structures. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1 : 1. Workability time: 30-40 minutes. Final hardening…
Fluid epoxy impregnator in water dispersion for consolidating and priming…
Fine-grained thixotropic, fibre-reinforced, controlled-shrinkage, medium-strength (30 N/mm2) mortar for repairing concrete Where to use To repair the concrete cover on deteriorated concrete…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced stitching in masonry. TECHNICAL DATA: Tensile modulus of elasticity: 170,000 N/mm². Content of fibre by weight: 68%. Tensile…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X414 is recommended for preparing very fluid (UNI 9858 and ENV 206 consistency classes S4 or S5) high-performance concrete that…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X414 is…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X404 is formulated for the preparation of high performance concrete with high fluidity (consistency class S4 and S5 according to…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X404 is…
New generation acrylic-based superplasticizer for concrete floor, in warm climates. Dynamon Floor 2 is a superplasticizing admixture based on acrylic polymers especially formulated for making…
New generation acrylic-based superplasticizer for concrete floor, in warm…
Cement-free lim- and Eco-Pozzolan-based fine mortars, respectively light-coloured and light pink, for finishing dehumidifying mortars applied on stone, brick and tuff masonry. Mape-Antique FC is a…
Cement-free lim- and Eco-Pozzolan-based fine mortars, respectively…
Thinners for PRIMER PU60. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Inflammable: yes. Storage: 12 months. Consumption: 0.25-1 litre per litre of PRIMER PU60 according to dilution rate…
Thinners for PRIMER PU60. TECHNICAL DATA: Consistency: liquid. Colour:…