Mapegrout Hi-Flow

Controlled-shrinkage fibre-reinforced fluid mortar for concrete repair.
Use Mapegrout Hi-Flow for the repair of very damaged concrete structures where the use of fluid mortars is recommended.
Made of cement binders, selected graded aggregate special additives and synthetic fibres, Mapegrout Hi-Flow is prepared by mixing a 25 kg bag with 13-14 and 0.25% of Mapecure SRA.
The product may be used without adding Mapecure SRA, when environmental conditions permit excellent curing.
The mix must be poured into sealed formwork. Care must be taken to let air escape in order to prevent air-bubbles. Thicknesses up to 4 cm can be repaired with Mapegrout Hi-Flow. For greater thicknesses, the addition of appropriately graded aggregate is recommended.
Mapegrout High-Flow meets the minimum requirements of EN 1504-3 standards for R4-class structural mortar.

Consumption
21 kg/m2 per cm of thickness.

Packaging
25 kg bags.

Related documentation

Technical data sheet
Download

Last Projects Mapegrout Hi-Flow

Category icon RESIDENTIAL BUILDINGS

2016/2019

Residential complex “Tsarskaya Square"

Moscow, Russia

Concrete restoration, Installation of floor and wall coverings, Sealants application, Surface preparation, Waterproofing

Category icon PUBLIC BUILDINGS AND URBAN DESIGN

2018

Former Enel complex

Rome, Italy

Structural reinforcement

Category icon SPORT FACILITIES

2017/2019

Luzhniki water palace

Moscow, Russia

Waterproofing, Installation of floors, Installation of wall coverings

Category icon PRODUCTION FACILITIES

2018

Cañavelarejo sewage water treatment plant

Cali, Colombia

Waterproofing, Sewerage maintenance, Concrete restoration

Keep in touch

Subscribe to our newsletter to get Mapei news