Extruded polystyrene insulation panels used in thermal insulation system, available in thicknesses of 4, 5, 6, 8 and 10 cm. Extruded polystyrene insulating panels with no surface skin, with a rough surface to help adhesive or smoothing and levelling compound grip to the surface. Mapetherm XPS is a rigid panel with square corners and no support frame, available in the following sizes: Mapetherm XPS 4: 1200x600x40 mm; Mapetherm XPS 5: 1200x600x50 mm; Mapetherm XPS 6: 1200x600x60 mm; Mapetherm XPS 8: 1200x600x80 mm; Mapetherm XPS 10: 1200x600x100 mm. Mapetherm XPS panels must be bonded to the substrate using Mapetherm AR1 or Mapetherm AR1 GG one-component cementitious adhesive in powder form, which is then mixed with water when required (please refer to the Technical Data Sheet for technical specifications). Use Adesilex FIS13 special adhesive in water dispersion as an alternative, which must be mixed together with cement (please refer to the Technical Data Sheet for technical specifications). The panel is bonded by spreading an even layer of adhesive over the whole surface of the panel. To help fix the Mapetherm XPS panels in place (but not as an alternative to the adhesive), anchors in a suitable length may also be used, such as Mapetherm FIX.
Packaging - Mapetherm XPS 4: 0.259 m3 packages, to cover a surface area of 6.48 m2; - Mapetherm XPS 5: 0.288 m3 packages, to cover a surface area of 5.76 m2; - Mapetherm XPS 6: 0.259 m3 packages, to cover a surface area of 4.32 m2; - Mapetherm XPS 8: 0.288 m3 packages, to cover a surface area of 3.60 m2; - Mapetherm XPS 10: 0.288 m3 packages, to cover a surface area of 2.88 m2.
Keep in touch
