MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".
MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation, during application, using the dry system of MapeWrap fabric.
Pour part B into part A and mix with a drill fitted with a stirrer until the resin is completely even.
Mixing ratio: 4 parts by weight of part A and 1 part by weight of part B. After mixing, the product remains workable for approximately 40 minutes at 23°C.
MapeWrap 31 must be applied directly onto the still fresh MapeWrap 11 or MapeWrap 12 with a brush or short-haired roller.
The fabric must then be placed over the concrete element that needs to be repaired or reinforced, without leaving any wrinkles.

Consumption
from 0.1 to 1.8 kg/m depending on the type of impregnated fabric.

Packaging
2.5 kg (A B);
5 kg (A B).

Related documentation

Technical data sheet
Download

Last Projects MAPEWRAP 31

Category icon PUBLIC BUILDINGS AND URBAN DESIGN

2017

Majlis Al Midfa Museum

Sharjah, United Arab Emirates

Masonry restoration

Category icon PUBLIC BUILDINGS AND URBAN DESIGN

2016/2017

S. Antuono Church

Venafro, Italy

Structural reinforcement

Category icon PUBLIC BUILDINGS AND URBAN DESIGN

2017

St. Joseph Church

Corato, Italy

Structural reinforcement

Category icon INFRASTRUCTURES

2018

Road number 16 - Santa Caterina

Bari, Italy

Structural reinforcement

Keep in touch

Subscribe to our newsletter to get Mapei news