Ready to use mixture of sand and cement mixed with KERACRETE latex. This mixture forms a high-performance adhesive with no vertical slip and is suitable for ceramic tiles, glass mosaic and stone…
Ready to use mixture of sand and cement mixed with KERACRETE latex. This…
Colouring system for Mapefloor Mapecolor Paste is a coloured paste which may be added to neutral epoxy formulates such as Primer SN, Mapefloor I 300 SL, Mapefloor I 350 SL, Mapefloor I 500 W,…
Colouring system for Mapefloor Mapecolor Paste is a coloured paste which may be…
One-component, solvent-free primer for polyurethane sealants, for use on absorbent and non-absorbent surfaces. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Inflammable: no. Application…
One-component, solvent-free primer for polyurethane sealants, for use on…
Two-component, epoxy binder Mapefloor I 910 is specially formulated to obtain a better hold in epoxy and polyurethane resin systems, and as a binder when mixing mortar with a consistency similar to a…
Two-component, epoxy binder Mapefloor I 910 is specially formulated to obtain a…
Transparent, silane and siloxane water-repellent impregnator in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active…
Transparent, silane and siloxane water-repellent impregnator in watery…
Two-component transparent epoxy primer in water dispersion. Mapecoat I 600 W is used to encourage bonding on absorbent and porous cementitious substrates before applying Mapefloor I 500 W (Mapefloor…
Two-component transparent epoxy primer in water dispersion. Mapecoat I 600 W is…
One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…
One-component, ultra-fluid polyurethane resin applied by injection for…
Film-forming curing compound in water emulsion for concrete. Mapecure SP is a white water emulsion of special resins which forms an effecient curing film on concrete. Mapecure SP provides reliable…
Film-forming curing compound in water emulsion for concrete. Mapecure SP is a…
Expansive agent for concrete. Expancrete is a powder admixture used to manufacture shrinkage-compensated concrete and mortars. Expancrete is suitable for water tight castings and castings that…
Expansive agent for concrete. Expancrete is a powder admixture used to…
Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…
Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…
Multipurpose latex additive for mortar and cementitious adhesive For the preparation of high performance mortar, screeds and renders. TECHNICAL DATA: Storage: 12 months. Consumption: depends on…
Multipurpose latex additive for mortar and cementitious adhesive For the…
Micronized acrylic-based primer in water dispersion. Malech is used as a primer for wall surfaces in general (e.g. concrete or repairs with cement mortars) before applying a coloured finishing coat…
Micronized acrylic-based primer in water dispersion. Malech is used as a primer…
Drying time: varies according to the absorbency of the substrate. Consistency: liquid. Colour: transparent. Flammability: no. Application temperature range: from 5°C to 35°C. Storage: 24 months.…
Drying time: varies according to the absorbency of the substrate. Consistency:…
Acrylic sealant suitable for painting over. Sealing expansion, shrinkage and fillet joints with movements of up to 12.5% of the width of the joint on ceramic, marble and natural stone façades and…
Acrylic sealant suitable for painting over. Sealing expansion, shrinkage and…
Adesilex PG2 TG is a two-component product based on epoxy resins, selected fine-grain aggregates and special additives according to a formula developed in the MAPEI research laboratories.
Adesilex PG2 TG is a two-component product based on epoxy resins, selected…
