Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
Mapetex GRP 225 is a mat made of chopped fiberglass strands, randomly distributed and bound with a resin to provide multi-directional tensile strength. It has good wet-through properties and is…
Mapetex GRP 225 is a mat made of chopped fiberglass strands, randomly…
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12…
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone…
High performance liquid foaming agent, based on biodegradable anionic surfactants, in combination with a natural lubricating polymer, for ground conditioning in mechanized tunneling
High performance liquid foaming agent, based on biodegradable anionic…
Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy resin, with high…
Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a…
Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A…
Paintable polyurethane sealant with a low modulus of elasticity for movements…
Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…
Closed cell polyethylene foam cord for the correct sizing of movement joints.…
MULTI-LAYERED SYSTEM MADE FROM ACRYLIC RESIN IN WATER DISPERSION COMBINED WITH GLASS FIBRE MESH FOR REFURBISHING PRO-GRADE INDOOR AND OUTDOOR TENNIS COURTS
MULTI-LAYERED SYSTEM MADE FROM ACRYLIC RESIN IN WATER DISPERSION COMBINED WITH…
One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…
One-component primer for silicone sealants. TECHNICAL DATA: Application of…
It is manufactured with non-woven polyester reinforcements that are impregnated and coated with a mixture of APP polymer modified bitumen. This mixture gives the membrane its excellent properties of…
It is manufactured with non-woven polyester reinforcements that are impregnated…
Mapeplan® T M is a synthetic roofing waterproofing membrane in flexible polyolefin FPO produced in one multi-extrusion coating process, with high quality raw materials, reinforced with polyester net.…
Mapeplan® T M is a synthetic roofing waterproofing membrane in flexible…
Mapeplan® T B is a synthetic roofing waterproofing membrane in flexible polyolefin FPO produced in one multi-extrusion coating process, with high quality raw materials, reinforced with glass mat.…
Mapeplan® T B is a synthetic roofing waterproofing membrane in flexible…
ADVANTAGES: Single-component for easy application by air-less spray, brush or roller. Excellent adhesion to prepared substrates. High elastic recovery. Forms a seamless barrier against cracks.…
ADVANTAGES: Single-component for easy application by air-less spray, brush or…
