Project Apartments in Viareggio, Viareggio


Yard	new realization
Location	Viareggio, Italy
Subcategory	APARTMENTS
Built in	2010
Opened in	2010
Application	apartments realization
Application Type	Facade interventions
Client	Costruzioni Edil-Ston
Contractor company	Costruzioni Edil-Ston
Installer companies	Costruzioni Edil-Ston
Architects	arch. Stefano Montemagni; geo. Marco Bertelli
MAPEI Distributor	Dini & Denna
Credits	Sergio Fortuna
Project Manager	ing. Angelo Puccinelli

ADESILEX P9

High performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles. Applications: Interior and exterior floor and wall bonding of all types of ceramic tiles and…

High performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

ADESILEX T SUPER

Adhesive for welding high-pressure PVC pipes. TECHNICAL DATA: Viscosity: fluid liquid. Final tensile strength: like the bonded PVC-pipe. Dry solids content: 35%. Colour: red. Application: brush.…

Adhesive for welding high-pressure PVC pipes. TECHNICAL DATA: Viscosity: fluid…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.

Two-component, high-performance, highly-deformable, quick-setting and drying…

IDROSTOP MASTIC

One-component adhesive for the installation of Idrostop. Idrostop Mastic is a ready-to-use solvent-free one-component MS polymer based adhesive. On extrusion, it is a thixotropic paste suitable for…

One-component adhesive for the installation of Idrostop. Idrostop Mastic is a…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERACOLOR SF

Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide.

Fine-grained, high-performance white cementitious mortar for grouting joints up…

LAMPOCEM

Ready-to-use shrinkage-free hydraulic binder with rapid setting and hardening. Use Lampocem for all types of rapid fixing on both vertical and horizontal concrete and masonry surfaces, for fixing…

Ready-to-use shrinkage-free hydraulic binder with rapid setting and hardening.…

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of…

TPE tape for flexible sealing and waterproofing of expansion joints and cracks…

MAPEFLUID N200

Superplasticiser for concrete. Mapefluid N200 is used to manufacture concrete with high fluidity (consistency class S4 and S5 according to EN 206-1) and a high performance in service. Mapefluid N200…

Superplasticiser for concrete. Mapefluid N200 is used to manufacture concrete…

MAPEGROUT BM

Two-component thixotropic cementitious mortar with low modulus of elasticity for the repair of concrete. Mapegrout BM is recommended for surface repair of damaged concrete subject to small…

Two-component thixotropic cementitious mortar with low modulus of elasticity…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar, applied by brush or by roller, for waterproofing concrete surfaces such as balconies, terraces, basins and swimming pools, and for protection…

Two-component, high-flexibility cementitious mortar, applied by brush or by…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEPROOF

Bentonite waterproofing sheets for structures below ground level, suitable for both horizontal and vertical surfaces. TECHNICAL DATA: Lower layer of geo-textile fabric: polypropylene fabric, 140…

Bentonite waterproofing sheets for structures below ground level, suitable for…

MAPEPROOF SWELL

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using an extrusion pistol. TECHNICAL DATA: Consistency: thixotropic paste. Solubility: non-soluble in water. Dry solids…

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for…

MAPESILENT PANEL

Tiles with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement, sandwiched to a resilient layer of polyester fibre.

Tiles with a bitumen and special polymer-based elasto-plastomeric membrane with…

MAPESILENT ROLL

Sheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene…

Sheets with a bitumen and special polymer-based elasto-plastomeric membrane…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 KN/m. Deformation at maximum strain: – 90%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

MAPETHERM AR1

One-component cementitious mortar for bonding and levelling insulation panels and for external thermal insulation systems. Mapetherm AR1 is used for bonding and smoothing floors and ceilings, in…

One-component cementitious mortar for bonding and levelling insulation panels…

MAPETHERM FIX 9

Polypropylene anchors. One-piece anchors used to mechanically fix insulating panels in place. Mapetherm FIX 9 is used in conjunction with adhesive, but not as a substitute. Drill a 9 mm hole in the…

Polypropylene anchors. One-piece anchors used to mechanically fix insulating…

MAPETHERM NET

Glass fibre mesh resistant to alkalis, used for reinforcing smoothing and levelling layers to repair facades and for Mapetherm thermal insulation systems. This product helps the smoothing and…

Glass fibre mesh resistant to alkalis, used for reinforcing smoothing and…

MAPETHERM PROFIL

Aluminium angle irons incorporated alkali resistant with glass fibre mesh. Aluminium elements used to finish off and reinforce the corners of panels used for thermal cladding systems. After bonding…

Aluminium angle irons incorporated alkali resistant with glass fibre mesh.…

PLANITOP 430

Fine-grained thixotropic, fibre-reinforced, controlled-shrinkage, medium-strength (30 N/mm2) mortar for repairing concrete Where to use To repair the concrete cover on deteriorated concrete…

Fine-grained thixotropic, fibre-reinforced, controlled-shrinkage,…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

Silancolor Paint

Highly vapour permeable and water repellent silicone based paint in water dispersion for exteriors and interiors. Silancolor Paint is a silicone resin based paint that has the advantages of…

Highly vapour permeable and water repellent silicone based paint in water…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…