Project Budai csaladi haz, Budapest

Budai csaladi haz

Budapest, Hungary

Ref #: 92024

Category: PUBLIC BUILDINGS AND PLACES


Yard	Cold cladding, warm cladding, waterproofing
Location	Budapest, Hungary
Subcategory	HOUSE
Application	Cold cladding, warm cladding, waterproofing, treatment of concrete surfaces
Start and finish date	2022/2023
Application Type	Floor/wall coverings, Tile & stone installation systems
Contractor company	NégyeS Mérnökiroda Kft.
Installer companies	Progresszív Burkoló Kft.
Architects	Regőczi Dénes
MAPEI Distributor	Hofstädter Építőanyag Centrum Kft., Zsiráf Építőanyagok Kft., Dalos és Társa Kft.
Credits	Salty Production Kft.
MAPEI Coordination	Hugyecsek György

Product used for the project

ANTIPLUVIOL

Silicone water-repellent in water solution for exterior walls. Use Antipluviol for the protection of absorbent vertical and inclined surfaces including finished concrete, renders, facing bricks and…

Silicone water-repellent in water solution for exterior walls. Use Antipluviol…

ANTIPLUVIOL W

Transparent, silane and siloxane water-repellent impregnator in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active…

Transparent, silane and siloxane water-repellent impregnator in watery…

MAPEBAND EASY

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems. TECHNICALDATA: Type of material: rubber sandwiched between two layers of non-woven…

Rubber tape sandwiched between two layers of non-woven fabric to form elastic…

MAPEFLEX MS 45

Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%.

Paintable hybrid sealant and adhesive with a high modulus of elasticity also…

MAPEGUARD UM 35

Waterproofing, uncoupling and anti-fracture membrane for cracked and damp substrates and substrates that are not fully cured before installing ceramic and stone tiles for internal and external…

Waterproofing, uncoupling and anti-fracture membrane for cracked and damp…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for…

PRIMER G

Synthetic resin-based water-dispersion primer with very low volatile organic compound (VOC)

Synthetic resin-based water-dispersion primer with very low volatile organic…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRALITE S2 FLEX

One-component, high-performance,highly deformable, lightweight, cementitious adhesive with extended open time, Low Dust technology and extremely high yield. Easy to apply by trowel with excellent…

One-component, high-performance,highly deformable, lightweight, cementitious…