Project Ceramiche Marazzi suspended tank, Sassuolo

Ceramiche Marazzi suspended tank

Sassuolo, Italy

Ref #: 3209

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Structural reinforcement
Location	Sassuolo, Italy
Subcategory	TANK
Built in	2002
Opened in	2003
Application	Consolidating concrete structures with FRP fabrics
Application Type	Concrete restoration systems
Contractor company	Edil Star - Sassuolo (MO)
Installer companies	Edil Star - Sassuolo (MO)
Architects	Prof. A. Balsamo
Credits	Carlo Alberto Rossi - Mapei Spa
Project Manager	Geom Bodecchi Sandro

Product used for the project

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

CARBOPLATE

Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy resin, with high…

Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a…

Protective and decorative elastic paint based on acrylic resins in water dispersion. Elastocolor Paint is used to protect the surfaces of concrete and cement renders from aggressive agents present in…

Protective and decorative elastic paint based on acrylic resins in water…

ELASTOCOLOR PRIMER

Solvent-based fixing primer with high penetration properties for porous substrates and curing agent for repair mortars. Elastocolor Primer is used to impregnate concrete surfaces repaired with…

Solvent-based fixing primer with high penetration properties for porous…

MAPEFER

Two-component corrosion-inhibiting cementitious mortar for the protection of reinforcing rods. Mapefer is a mortar made up of polymers in water dispersion, cement binders and corrosion inhibitors to…

Two-component corrosion-inhibiting cementitious mortar for the protection of…

MAPEGROUT BM

Two-component thixotropic cementitious mortar with low modulus of elasticity for the repair of concrete. Mapegrout BM is recommended for surface repair of damaged concrete subject to small…

Two-component thixotropic cementitious mortar with low modulus of elasticity…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP C UNI-AX

High-strength, unidirectional carbon fibre fabric with a high modulus of elasticity. TECHNICAL DATA: Weight: 300-600 g/m². Equivalent thickness of dry fabric: 0.164-0.331 mm. Tensile strength: ≥…

High-strength, unidirectional carbon fibre fabric with a high modulus of…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

PLANITOP 200

One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to smooth…

One-component cementitious mortar with high bonding strength for interior and…