Project Wellness center FORTYSEVEN, Baden, Baden

Wellness center FORTYSEVEN, Baden

Baden, Switzerland

Ref #: 4594

Category: TOURISM AND WELLNESS

Construction


Yard	Waterproofing & installation of ceramics tiles
Location	Baden, Switzerland
Subcategory	Spa
Application	Delivery of products for waterproofing & ceramics
Start and finish date	2018/2021
Application Type	Tile & stone installation systems, Waterproofing systems
Contractor company	Stiftung Gesundheitsförderung Bad Zurzach + Baden, Bad Zurzach
Installer companies	Bula AG, Neftenbach & Jola Construct GmbH, Hünenberg
Architects	Mario Botta Architetti, Mendrisio
Credits	Gianni Baumann
Project Manager	HRS Real Estate AG, Zürich
MAPEI Coordination	Maurizio Barletta, Mathias Donauer, Pirmin Nünlist

Product used for the project

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.

Two-component, high-performance, highly-deformable, quick-setting and drying…

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

KERAPOXY ADHESIVE

Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12…

Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone…

KERAPOXY EASY DESIGN

Two-component, versatile, decorative, acid-resistant epoxy grout, with a bacteriostatic agent and BioBlock® technology, easy to apply and clean, ideal for grouting ceramic tiles, glass mosaics and…

Two-component, versatile, decorative, acid-resistant epoxy grout, with a…

MAPEBAND EASY

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems. TECHNICALDATA: Type of material: rubber sandwiched between two layers of non-woven…

Rubber tape sandwiched between two layers of non-woven fabric to form elastic…

MAPEBAND FLEXROLL

Tape for the flexible waterproofing of expansion joint and cracks. TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at failure: > 400%. Tear strength: > 600 N/cm. Shore A…

Tape for the flexible waterproofing of expansion joint and cracks. TECHNICAL…

MAPECOAT I 24

Epoxy paint for acid-resistant coating of concrete surfaces. Mapecoat I 24 may be used for concrete floors, storage tanks and flumes which come into contact with aggressive chemicals, such as acids,…

Epoxy paint for acid-resistant coating of concrete surfaces. Mapecoat I 24 may…

MAPEGROUT 430

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPEGUARD WP 200

Alkali-resistant waterproofing and anti-fracture membrane for internal use; suitable for overlaying with ceramic, natural stone and LVT floors. TECHNICAL DATA: Material: product made up of three…

Alkali-resistant waterproofing and anti-fracture membrane for internal use;…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for…

PRIMER KL

Adhesion promoter on non-porous surfaces for epoxy, epoxy-polyurethane and two-component polyurethane adhesives. Where to use: Adhesion promoter for Lignobond, Ultrabond P902 2K and Ultrabond P913 2K…

Adhesion promoter on non-porous surfaces for epoxy, epoxy-polyurethane and…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…