Project Hilton Hotel u Dubrovniku, Dubrovnik

Hilton Hotel u Dubrovniku

Dubrovnik, Croatia

Ref #: 3846

Category: COMMERCIAL FACILITIES


Yard	New floorings
Location	Dubrovnik, Croatia
Subcategory	HOTEL/INN
Built in	2006
Opened in	2006
Application	Installation of ceramic and natural stone tiles
Application Type	Floor/wall coverings
Installer companies	AB KERAMIKA, Dubrovnik, Croatia
Architects	Alfa Plan, Stijepo Butijer
MAPEI Distributor	AB KERAMIKA, Dubrovnik, Croatia
Credits	Hotel Hilton Imperial

Product used for the project

ADESILEX P9

Easily workable Highly thixotropic Perfect adherence to all materials normally used in building Hardens with minimal shrinkage Extended open time

Easily workable Highly thixotropic Perfect adherence to all materials normally…

EPORIP

Can be applied by brush on both horizontal and vertical surfaces Polymerises without shrinkage Waterproof after curing Possesses excellent dielectric properties High mechanical characteristics to…

Can be applied by brush on both horizontal and vertical surfaces Polymerises…

GRANIRAPID

High performance, deformable, fast setting and hydration two-component cementitious adhesive for ceramic tiles and stone material. Applications: Particularly suitable for the installation of stone…

High performance, deformable, fast setting and hydration two-component…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PRIMER G

Synthetic resin-based water-dispersion primer with very low volatile organic compound (VOC)

Synthetic resin-based water-dispersion primer with very low volatile organic…

ULTRACOLOR PLUS

Very low emissions of VOC Is certified EC1 Plus by the German association GEV Earn important LEED credits Guarantees colour uniformity Mould-resistant (BioBlock® Technology) Grouted areas are quickly…

Very low emissions of VOC Is certified EC1 Plus by the German association GEV…