Project Hôpital de la Tour, Meyrin, Meyrin

Hôpital de la Tour, Meyrin

Meyrin, Switzerland

Ref #: 4544

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Floor coverings
Location	Meyrin, Switzerland
Subcategory	HOSPITAL
Built in	2016
Opened in	2019
Application	Delivery of products for floor coverings over an area of 12 000 square metres
Application Type	Installation of floors
Installer companies	Anhy SA, Plan-les-Ouates; Realsport Goup, Rossens
Architects	de Planta et Associés, Carouge; Aris Serbetis Architecte, Genève; Tridimensions architectes SA, Genève
Specialists involved	Hôpital de La Tour – construction management: Gestron Services (Suisse) SA, Genève
Credits	Sébastien Crettaz, Crans-Montana
MAPEI Coordination	Marcello Maieron

Product used for the project

EPORIP TURBO

Very fast hardening two-component polyester resin. Where to use: - Sealing cracks in screeds. - By adding dry sand, Eporip Turbo can be used to manufacture mortars for small reparations. Eporip Turbo…

Very fast hardening two-component polyester resin. Where to use: - Sealing…

FIBERPLAN

Fibre-reinforced ultra-fast hardening self-levelling smoothing compound. Applications: Interior levelling thicknesses from 3 to 10 mm of existing and new wooden floors, wooden boarding, chip-board…

Fibre-reinforced ultra-fast hardening self-levelling smoothing compound.…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both floating and bonded screeds on either old or new floor…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

PRIMER MF

Two-component solvent-free epoxy primer to be used as an adhesion promoter for products from the Mapefloor range and to consolidate and waterproof cementitious substrates. Where to use: -…

Two-component solvent-free epoxy primer to be used as an adhesion promoter for…

ULTRABOND ECO V4 SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…

ULTRABOND ECO V4 SP FIBER

Multi-purpose, acrylic adhesive in water dispersion with extended open time and very low emission level of volatile organic compounds (VOC) improved by adding fibres, particularly suitable for laying…

Multi-purpose, acrylic adhesive in water dispersion with extended open time and…

ULTRAPLAN MAXI

Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3 to 30 mm. Applications: Interior levelling of new and existing substrates to make them suitable for receiving all types…

Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3…