Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: - tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and exteriors, subject to heavy and…
Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: - tile or…
Low viscosity, two-component epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Particularly suitable for installing thin…
Low viscosity, two-component epoxy-polyurethane adhesive for resilient and…
Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…
Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…
Very fast hardening two-component polyester resin. Where to use: - Sealing cracks in screeds. - By adding dry sand, Eporip Turbo can be used to manufacture mortars for small reparations. Eporip Turbo…
Very fast hardening two-component polyester resin. Where to use: - Sealing…
Latex admixture inducing elasticity to be mixed with Keraquick. Applications: Latex Plus is an admixture to be mixed with Keraquick. It improves deformability to meet the requirements of class S2…
Latex admixture inducing elasticity to be mixed with Keraquick. Applications:…
Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both floating and bonded screeds on either old or new floor…
Pre-blended, ready-to-use, quick-setting and drying (24 hours),…
PVC waterproofing and isolating sheet reinforced with glass fibres, for laying internal resilient and fabric floors on substrates which have cracks, which are particularly dirty or damp or which are…
PVC waterproofing and isolating sheet reinforced with glass fibres, for laying…
Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore…
Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for…
Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…
Synthetic resin based primer in water dispersion. Applications: Treating gypsum…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…
Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…
Multi-purpose, acrylic adhesive in water dispersion with a long open time and…
Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications: Interior levelling of new and existing substrates, as long as not subject to moisture, to make them…
Ultra-fast hardening self-levelling smoothing compound with very low VOC…