Project Neftohimik Building,


Yard	Stone application and facade renovation
Location	Bulgaria
Subcategory	INDUSTRY
Built in	2019
Opened in	2020
Application	Products for ceramic and stone materials
Start and finish date	2019/2020
Application Type	Facade interventions, Installation of floors, Waterproofing systems
Client	Municipality of Burgas
Contractor company	Bulplast BG
Installer companies	Max Group
Project Manager	Marin Tzvetkov
MAPEI Coordination	Ivan Ivanov, Nikolay Zheliazkov, Petar Yankov

FUGOLASTIC

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is used as a substitute for water to mix Keracolor FF and GG cementitious grouts, to improve the grout compactness,…

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX EASY S1

Easy-to-apply high-performance deformable cementitious adhesive with extended open time and high wetting capacity for ceramic tiles and stone materials. With very low emission of volatile organic…

Easy-to-apply high-performance deformable cementitious adhesive with extended…

KERALASTIC T

High performance two-component polyurethane adhesives for ceramic tiles and stone material. Applications: Keralastic is an improved reaction resin adhesive (R2). Interior and exterior floor and wall…

High performance two-component polyurethane adhesives for ceramic tiles and…

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for…

MAPETHERM NET

Glass fibre mesh resistant to alkalis, used for reinforcing smoothing and levelling layers to repair facades and for Mapetherm thermal insulation systems. This product helps the smoothing and…

Glass fibre mesh resistant to alkalis, used for reinforcing smoothing and…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PLASTIMUL

Bitumen waterproofing emulsion for general purpose use. Plastimul is used for waterproofing horizontal and vertical surfaces, such as foundations, retaining walls, layers beneath tiles, etc. Due to…

Bitumen waterproofing emulsion for general purpose use. Plastimul is used for…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

TOPCEM

Special fast setting hydraulic binder for the preparation of normal setting and fast drying (4 days) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on…

Special fast setting hydraulic binder for the preparation of normal setting and…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable coarse-textured cementitious paste applied in layers…