Project NH Hoteles Olomouc, Olomouc


Yard	new hotel
Location	Olomouc, Czech Republic
Subcategory	HOTEL/INN
Built in	2009
Opened in	2010
Application	floor coverings, concrete reparation, waterproofing
Application Type	New building
Installer companies	GEMO Olomouc

ADESILEX P9

High performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles. Applications: Interior and exterior floor and wall bonding of all types of ceramic tiles and…

High performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PA

Adhesive based on synthetic resins in alcohol for bonding wooden flooring. Where to use: Bonding of: - wood-back strips and mosaic wooden flooring; - all types of wooden strips and blocks; - small…

Adhesive based on synthetic resins in alcohol for bonding wooden flooring.…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

KERALASTIC T

High performance two-component polyurethane adhesives for ceramic tiles and stone material. Applications: Keralastic is an improved reaction resin adhesive (R2). Interior and exterior floor and wall…

High performance two-component polyurethane adhesives for ceramic tiles and…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

KERAQUICK

High performance, deformable, rapid setting cementitious adhesive with no vertical slip for ceramic tiles and stone material. Applications: Interior and exterior floor and wall bonding of all types…

High performance, deformable, rapid setting cementitious adhesive with no…

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both floating and bonded screeds on either old or new floor…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPEFINISH

Two-component cementitious mortar for finishing concrete surfaces. Mapefinish is used to level small imperfections of poured concrete and to smooth surfaces after repairs. Mapefinish is suitable for…

Two-component cementitious mortar for finishing concrete surfaces. Mapefinish…

MAPEFLEX PU50 SL

Paintable, castable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.25 N/mm².…

Paintable, castable polyurethane sealant with a low modulus of elasticity for…

MAPEFOAM

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

Mapegrout Thixotropic

Controlled-shrinkage fibre-reinforced mortar for the repair of concrete. Use Mapegrout Thixotropic for all concrete repairs such as: reconstruction of concrete cover, repairs of corners, beams,…

Controlled-shrinkage fibre-reinforced mortar for the repair of concrete. Use…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PRIMER PA

Ready-to-use synthetic resin based solvent primer for bonding with Adesilex PA. Where to use: Preparation of substrates before the laying of wooden flooring with Adesilex PA adhesive. Primer PA?dries…

Ready-to-use synthetic resin based solvent primer for bonding with Adesilex PA.…

TOPCEM PRONTO

Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on existing and new slabs for the…

Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRAPLAN ECO

Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications: Interior levelling of new and existing substrates, as long as not subject to moisture, to make them…

Ultra-fast hardening self-levelling smoothing compound with very low VOC…

ULTRAPLAN MAXI

Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3 to 30 mm. Applications: Interior levelling of new and existing substrates to make them suitable for receiving all types…

Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3…