Thixotropic epoxy adhesive with extended workability. Adesilex PG2 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives. Adesilex PG2 is…
Thixotropic epoxy adhesive with extended workability. Adesilex PG2 is a…
Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. Use Idrosilex Pronto to waterproof foundations, walls, cellars, basements,…
Osmotic cementitious mortar suitable for contact with drinking water, for…
Cement-free hydraulic binder for light-coloured dehumidifying lime- and Eco-Pozzolan-based mortars for the restoration of damp stone, brick and tuff masonry. Mape-Antique LC is a pre-blended…
Cement-free hydraulic binder for light-coloured dehumidifying lime- and…
Two-component corrosion-inhibiting cementitious mortar for the protection of reinforcing rods. Mapefer is a mortar made up of polymers in water dispersion, cement binders and corrosion inhibitors to…
Two-component corrosion-inhibiting cementitious mortar for the protection of…
Two-component thixotropic cementitious mortar with low modulus of elasticity for the repair of concrete. Mapegrout BM is recommended for surface repair of damaged concrete subject to small…
Two-component thixotropic cementitious mortar with low modulus of elasticity…
Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…
Normal setting thixotropic epoxy putty for levelling concrete surfaces.…
Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…
Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…
High-strength, unidirectional carbon fibre fabric with a high modulus of elasticity. TECHNICAL DATA: Weight: 300-600 g/m². Equivalent thickness of dry fabric: 0.164-0.331 mm. Tensile strength: ≥…
High-strength, unidirectional carbon fibre fabric with a high modulus of…
Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…
Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…
One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to smooth…
One-component cementitious mortar with high bonding strength for interior and…
Fast setting shrinkage compensated thixotropic mortar for cortical restoration of concrete by applying in a single coat a thickness of mortar variable between 1 and 40 mm. Planitop 400 is used for…
Fast setting shrinkage compensated thixotropic mortar for cortical restoration…
Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on existing and new slabs for the…
Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds…