Project Pirelli Skyscraper, Milano


Yard	Regione Lombardia Building
Location	Milano, Italy
Subcategory	OFFICES
Built in	1956
Opened in	1960
Application	repairing the façade’s glass mosaic coverings, remaking the external avements laying the internal floors and consolidating the concrete structures
Start and finish date	2002/2005
Application Type	Concrete restoration systems
Client	Regione Lombardia
Contractor company	Grassi & Crespi Srl. e Marcora Srl; Eleca
Installer companies	Biesse, Milano; Liuni, Milano
Architects	Giò Ponti
MAPEI Distributor	Biesse, Liuni
Credits	Gianni Dal Magro, Massimiliano Nicastro - Mapei SpA
MAPEI Coordination	Andrea Aliverti,Tiziano Cerulli, Luigi Coppola, Fulvio Bianchi, Paolo Giglio, Massimiliano Nicastro e Matteo Venturini.

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

CARBOPLATE

Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy resin, with high…

Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a…

EPOJET LV

Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…

Two-component epoxy resin with a very low viscosity for injecting into…

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

Very fast hardening two-component polyester resin. Where to use: - Sealing cracks in screeds. - By adding dry sand, Eporip Turbo can be used to manufacture mortars for small reparations. Eporip Turbo…

Very fast hardening two-component polyester resin. Where to use: - Sealing…

GRANIRAPID

High performance, deformable, fast setting and hydration two-component cementitious adhesive for ceramic tiles and stone material. Applications: Particularly suitable for the installation of stone…

High performance, deformable, fast setting and hydration two-component…

$LATEX PLUS$

LATEX PLUS

Latex admixture inducing elasticity to be mixed with Keraquick. Applications: Latex Plus is an admixture to be mixed with Keraquick. It improves deformability to meet the requirements of class S2…

Latex admixture inducing elasticity to be mixed with Keraquick. Applications:…

MAPEFER

Two-component corrosion-inhibiting cementitious mortar for the protection of reinforcing rods. Mapefer is a mortar made up of polymers in water dispersion, cement binders and corrosion inhibitors to…

Two-component corrosion-inhibiting cementitious mortar for the protection of…

MAPEGROUT BM

Two-component thixotropic cementitious mortar with low modulus of elasticity for the repair of concrete. Mapegrout BM is recommended for surface repair of damaged concrete subject to small…

Two-component thixotropic cementitious mortar with low modulus of elasticity…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

PRIMER MF

Two-component solvent-free epoxy primer to be used as an adhesion promoter for products from the Mapefloor range and to consolidate and waterproof cementitious substrates. Where to use: -…

Two-component solvent-free epoxy primer to be used as an adhesion promoter for…

STABILCEM SCC

Cementitious binder for manufacturing dimensionally stable self-compacting concrete mixtures to repair concrete structures. Stabilcem SCC is used to manufacture concretes with different aggregate…

Cementitious binder for manufacturing dimensionally stable self-compacting…

TOPCEM PRONTO

Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on existing and new slabs for the…

Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds…

ULTRABOND ECO V4 SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…

ULTRAPLAN

Ultra-fast hardening self-levelling smoothing compound. Applications: Interior levelling of new and existing substrates to make them suitable for receiving all types of flooring where a high…

Ultra-fast hardening self-levelling smoothing compound. Applications: Interior…

ADESILEX MT32

Product not available for this market,
contact us

NIVORAPID

Product not available for this market,
contact us

ULTRABOND ECO FIX

Product not available for this market,
contact us

ULTRABOND ECO 540

Product not available for this market,
contact us

Pirelli Skyscraper

Construction

Additional Attachments

Product used for the project

Keep in touch