Project Renovation of the M3 metro line, Budapest

Renovation of the M3 metro line

Budapest, Hungary

Ref #: 792023

Category: INFRASTRUCTURES


Yard	subsequent repair of waterproofing, cold cladding
Location	Budapest, Hungary
Subcategory	METRO
Application	subsequent repair of waterproofing, cold cladding
Start and finish date	2019/2023
Application Type	Tile & stone installation systems, Waterproofing systems
Contractor company	BKV Zrt.
Installer companies	Swietelsky Vasúttechnika Kft., Wayet Service Kft.
MAPEI Distributor	Bau Systeme 92 Kft.
MAPEI Coordination	Horváth Ádám, Garay Gergely

Product used for the project

ADESILEX P9

Easily workable Highly thixotropic Perfect adherence to all materials normally used in building Hardens with minimal shrinkage Extended open time

Easily workable Highly thixotropic Perfect adherence to all materials normally…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

LAMPOSILEX

Ultra-fast setting and drying hydraulic binder for plugging water leaks. Use Lamposilex to plug any source of water, even under pressure, in basements, tunnels, subways etc. and for sealing…

Ultra-fast setting and drying hydraulic binder for plugging water leaks. Use…

MAPEBAND EASY

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems. TECHNICALDATA: Type of material: rubber sandwiched between two layers of non-woven…

Rubber tape sandwiched between two layers of non-woven fabric to form elastic…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for…

PRIMER G

Synthetic resin-based water-dispersion primer with very low volatile organic compound (VOC)

Synthetic resin-based water-dispersion primer with very low volatile organic…