Project S.Bernardo Church, Cassina Nuova di Bollate


Yard	New flooring
Location	Cassina Nuova di Bollate, Italy
Subcategory	CHURCH
Built in	2005
Opened in	2005
Application	New resin and cement-based flooring realization
Application Type	Installation of floors
Contractor company	Edil-Co-Ri snc - Geom. S. Garattini
Installer companies	Resin Floor (A. Ormelli)
Credits	Giovanna Novella (Mapei SpA); Gianni Dal Magro
Project Manager	Don Mario Mascheroni

EPOJET

Two-component superfluid epoxy resin for injection. Epojet is used for monolithic repair of structures which have cracked due to overloading, impact, earthquakes etc; it is also used for bonding and…

Two-component superfluid epoxy resin for injection. Epojet is used for…

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

MAPE-ANTIQUE MC

Pre-packed, cement-free, light coloured dehumidifying lime- and Eco-Pozzolan-based mortar for the restoration of damp stone, brick and tuff masonry. Mape-Antique MC is especially recommended for the…

Pre-packed, cement-free, light coloured dehumidifying lime- and…

MAPE-ANTIQUE RINZAFFO

Light-coloured salt-resistant cement-free pre-packed lime- and Eco-Pozzolan-based mortar to be used before applying Mape-Antique MC, Mape-Antique CC and Mape-Antique LC, dehumidifying mortars on…

Light-coloured salt-resistant cement-free pre-packed lime- and…

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPESIL BM

Neutral silicone sealant for metal-work for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore A hardness: 25. Workability…

Neutral silicone sealant for metal-work for movements up to 25%. TECHNICAL…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 21

Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the “damp system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP G FIOCCO

High-strength glass fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”. TECHNICAL DATA: Type of fibre: E type glass. Diameters…

High-strength glass fibre cord to be impregnated with MAPEWRAP 21…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

TOPCEM PRONTO

Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on existing and new slabs for the…

Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds…