Project S.Cesarea Thermal SpA, S.Cesarea Terme


Yard	global SpA restoration
Location	S.Cesarea Terme, Italy
Subcategory	HOTEL/INN
Built in	2011
Opened in	2012
Application	Ceramic installation, structural strenghtening and painting
Application Type	Waterproofing systems
Client	Terme di S. Cesarea SpA
Contractor company	f.lli Perrotta snc
Installer companies	f.lli Perrotta snc
Architects	ing. Tartini; ing. Codazzo; arch. Criniti
Credits	ing. Dispoto
Project Manager	ing. Rocco Tartini

ADESILEX PG2

Thixotropic epoxy adhesive with extended workability. Adesilex PG2 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives. Adesilex PG2 is…

Thixotropic epoxy adhesive with extended workability. Adesilex PG2 is a…

CARBOPLATE

Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy resin, with high…

Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a…

Elastocolor Paint

Protective and decorative elastic paint based on acrylic resins in water dispersion. Elastocolor Paint is used to protect the surfaces of concrete and cement renders from aggressive agents present in…

Protective and decorative elastic paint based on acrylic resins in water…

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

KERAPOXY ADHESIVE

Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12…

Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEGROUT BM

Two-component thixotropic cementitious mortar with low modulus of elasticity for the repair of concrete. Mapegrout BM is recommended for surface repair of damaged concrete subject to small…

Two-component thixotropic cementitious mortar with low modulus of elasticity…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 KN/m. Deformation at maximum strain: – 90%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP G FIOCCO

High-strength glass fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”. TECHNICAL DATA: Type of fibre: E type glass. Diameters…

High-strength glass fibre cord to be impregnated with MAPEWRAP 21…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

PLANITOP 200

One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to smooth…

One-component cementitious mortar with high bonding strength for interior and…

PLANITOP HDM MAXI

Two-component, high-ductility cementitious mortar with a pozzolanic-reaction binder base, applied at a maximum thickness of 25 mm, for levelling off stone, brick and tuff substrates before laying…

Two-component, high-ductility cementitious mortar with a pozzolanic-reaction…

PRIMER 3296

Aqueous acrylic primer with excellent penetration effect for dusty screeds. Where to use: Consolidation of unsound substrates. Preparation of unsound screed surfaces before the installation of wooden…

Aqueous acrylic primer with excellent penetration effect for dusty screeds.…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

TOPCEM PRONTO

Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on existing and new slabs for the…

Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds…

MAPEWRAP C QUADRI-AX

Product not available for this market,
contact us

KERAPOXY DESIGN

Product not available for this market,
contact us

S.Cesarea Thermal SpA

Construction

Browse the project Gallery

Product used for the project

Keep in touch