Project Tatralandia Aquapark, Liptovský Mikuláš


Yard	outdoor and indoor pools
Location	Liptovský Mikuláš, Slovakia
Subcategory	Spa
Built in	2012
Application	supply of products for waterproofing and ceramics installation
Application Type	Floor/wall coverings
Client	J&T
Contractor company	J&T
Installer companies	RIASTAV, s.r.o.
MAPEI Distributor	MAPEI SK, s.r.o.
Project Manager	Vladimír Pytel

ADESILEX P10

White high performance cementitious adhesive with no vertical slip and extended open time for glass, ceramic and marble mosaic coverings. Applications: Interior and exterior floor, wall and swimming…

White high performance cementitious adhesive with no vertical slip and extended…

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

ISOLASTIC

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

KERAQUICK

High performance, deformable, rapid setting cementitious adhesive with no vertical slip for ceramic tiles and stone material. Applications: Interior and exterior floor and wall bonding of all types…

High performance, deformable, rapid setting cementitious adhesive with no…

$LATEX PLUS$

LATEX PLUS

Latex admixture inducing elasticity to be mixed with Keraquick. Applications: Latex Plus is an admixture to be mixed with Keraquick. It improves deformability to meet the requirements of class S2…

Latex admixture inducing elasticity to be mixed with Keraquick. Applications:…

MAPECOAT I 24

Epoxy paint for acid-resistant coating of concrete surfaces. Mapecoat I 24 may be used for concrete floors, storage tanks and flumes which come into contact with aggressive chemicals, such as acids,…

Epoxy paint for acid-resistant coating of concrete surfaces. Mapecoat I 24 may…

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPEGROUT SV

Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing concrete and fixing drains, manholes and urban architectural fittings in place. TECHNICAL DATA: Maximum dimension of…

Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar, applied by brush or by roller, for waterproofing concrete surfaces such as balconies, terraces, basins and swimming pools, and for protection…

Two-component, high-flexibility cementitious mortar, applied by brush or by…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 KN/m. Deformation at maximum strain: – 90%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

TOPCEM

Special fast setting hydraulic binder for the preparation of normal setting and fast drying (4 days) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on…

Special fast setting hydraulic binder for the preparation of normal setting and…

TOPCEM PRONTO

Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on existing and new slabs for the…

Ready to use prepacked mortar for fast-drying (4 days) normal setting screeds…

TRIBLOCK P

Three-component, epoxy-cementitious primer for waterproofing damp substrates, including non-absorbent ones. Where to use: Triblock P is used as a waterproofing system for damp substrates, especially:…

Three-component, epoxy-cementitious primer for waterproofing damp substrates,…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…