Industrial Flooring, Decorative Floors and Systems for Car Parks

The products from this line enable you to create floors of the highest technical and aesthetic quality for a vast range of uses. In fact, numerous settings can benefit from innovative flooring resistant to abrasion, impact loads, cracking and aggressive chemical agents.

Industrial Flooring, Decorative Floors and Systems for Car Parks

Select a product category

Car Park Flooring

Cement-based Flooring System

Colouring Pastes and Add-ons

Decorative Flooring Products

Epoxy Coatings

Fast Cure Resin Flooring Systems

Floor Preparation (screeds, levellers & protective coatings)

Heavy Duty Polyurethane Cement

Polyurethane Coatings

Primers for Industrial Floors

MAPECEM

DESCRIPTION: Special fast-setting hydraulic binder for the preparation of rapid setting and drying (24 hours) screeds with controlled shrinkage.…

DESCRIPTION: Special fast-setting hydraulic binder for the preparation of rapid…

MAPECEM PRONTO

TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of water. Workability time: 20-30 minutes. Set to light…

TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately…

MAPECEM QUICKPATCH

DESCRIPTION: High-Performance, High-Flow Concrete Patch Mapecem Quickpatch is a versatile, fast-setting, cementitious material used for the patching…

DESCRIPTION: High-Performance, High-Flow Concrete Patch Mapecem Quickpatch is…

MAPECOAT SF

Mapecoat SF is a three-component, hard, colored, aromatic polyurethane finish with excellent resistance to wear and abrasion Mapecoat SF is used to…

Mapecoat SF is a three-component, hard, colored, aromatic polyurethane finish…

MAPECRETE LI HARDENER

TECHNICAL DATA: Application temperature range: from +5°C to +40°C. Minimum waiting time for the product to penetrate: 30 min. Loss of material with…

TECHNICAL DATA: Application temperature range: from +5°C to +40°C. Minimum…

MAPECRETE STAIN PROTECTION

TECHNICAL DATA: Application temperature range: from +10°C to +30°C. Absorption by immersion in oil (%): 0.35. Capillary absorption EN 13057 (kg/m²∙h…

TECHNICAL DATA: Application temperature range: from +10°C to +30°C. Absorption…

MAPEFLOOR I 900

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 100 : 50. Colour of mix: transparent amber. Consistency of mix: viscous fluid. Dust dry at +23°C and…

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 100 : 50. Colour of mix:…

PRIMER CC 200

Two-component epoxy primer for oil contaminated cementitious surfaces. Where to use: Primer CC 200 is a special primer specifically formulated for…

Two-component epoxy primer for oil contaminated cementitious surfaces. Where to…

TOPCEM

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry…

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of…

UC LEVELLER

TECHNICAL DATA: Consistency: fine powder Colour: Grey Setting time: 2-4 hours Ready for traffic: 12 hours Waiting time before installing flooring: 24…

TECHNICAL DATA: Consistency: fine powder Colour: Grey Setting time: 2-4 hours…

ULTRAPLAN ECO

Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications: Interior levelling of new and existing substrates,…

Ultra-fast hardening self-levelling smoothing compound with very low VOC…

ULTRAPLAN RENOVATION

DESCRIPTION: Fibre-reinforced levelling compound for interiors for thicknesses from 3 to 40 mm in a single application. APPLICATIONS: Where to…

DESCRIPTION: Fibre-reinforced levelling compound for interiors for thicknesses…

Concrete and resin, between aesthetics and technique

The Mapei research and development laboratories have developed a series of systems for epoxy, polyurethane and cementitious floors which allow users to upgrade floors quickly and efficiently to match their real use. Our proposals are also certified according to the most severe standards and are widely used in numerous sectors of industry such as the food and chemical-pharmaceuticals industries, in contemporary surroundings, places of artistic interest, open offices and in industrial, civil and commercial settings