Project Leisure, sport & event center Tägi, Wettingen, Wettingen


Yard	Tile works on a surface of over 4000 m2
Location	Wettingen, Switzerland
Subcategory	SPORT CENTER
Application	Delivery of products for the ceramic tiles
Start and finish date	2018/2020
Application Type	Floor/wall covering
Contractor company	Tägi AG, Wettingen
Installer companies	Fehlmann AG, Hunzenschwil; Anliker AG Bauunternehmung, Luzern
Architects	Scheitlin Syfrig Architekten, Luzern
Credits	Daniela Schöni, Aarau/Lenzburg
MAPEI Coordination	Raffael Schöni

ADESILEX PG4

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN…

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70…

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

KERAPOXY CLEANER

TECHNICAL DATA: pH of liquid: 12 Waiting time before rinsing: several minutes. In the case of larger residues, leave the solution to react for longer or repeat the cleaning operation. Storage: 24…

TECHNICAL DATA: pH of liquid: 12 Waiting time before rinsing: several minutes.…

MAPEBAND FLEX ROLL

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at failure: > 400%. Tear strength: > 600 N/cm. Shore A hardness: approx. 80. Width: 300 mm (other sizes available upon…

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at…

MAPEGROUT 430

DESCRIPTION: Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430…

DESCRIPTION: Fine-grained, fibre-reinforced, normal-setting thixotropic mortar…

MAPENET 150

TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm. Storage: unlimited. Packaging: 50 m x 1 m rolls.

TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm.…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330 - Levelling Mortar

DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: …

DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for…

PRIMER MF

Two-component solvent-free epoxy primer to be used as an adhesion promoter for products from the Mapefloor range and to consolidate and waterproof cementitious substrates. Where to use: -…

Two-component solvent-free epoxy primer to be used as an adhesion promoter for…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRATOP

Description Ultra-quick setting self-levelling mortar based on special hydraulic binders, for abrasion-resistant floor coverings at a thickness from 5 to 40 mm. Application Ultratop may remain on…

Description Ultra-quick setting self-levelling mortar based on special…