Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts
Ultracolor Plus FA – with DropEffect™ technology and CO2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.
Fine aggregate (FA) allows for narrow joint widths and improved cleanability.
No efflorescence
Easy to install and stain-resistant
Sealer not typically required
CO2 emissions measured throughout the product’s life cycle are fully offset through the acquisition of third-party-certified carbon credits that support climate-mitigation projects.
MAPEI promotes the total offsetting of residual CO2 emissions during the life cycle of products by acquiring certified environmental credits to support the implementation of reforestation projects. CO2 emissions measured throughout the life cycle of products from the Zero line in 2025, using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of third-party-certified carbon credits in support of forestry protection projects. A commitment to the planet, to people and to biodiversity. For more details on how emissions are calculated and on climate-mitigation projects that are financed through certified carbon credits, click here.
If you wish to save the calculation result, log in to the website.
The calculation is based on the actual volume to be filled and the product density.
The provided data should be considered indicative and for estimation purposes only, as certain factors that may still affect the actual consumption cannot be considered (for example, tile roughness, excess residual product, surface irregularities, etc.).
Although not required, for optimal results, Ultracolor Plus FA or Ultracolor Plus Max may be sealed - especially in places such as showers. Sealers make grout maintenance easier in the long run. The solution: UltraCareGrout Sealer.
Keep in touch
Technical Data Sheet
