Imperméabilisation à vitesse turbo

avec Mapelastic Turbo

Pour l'imperméabilisation et le pontage de fissures

Prise rapide

S'applique avec un rouleau ou au pinceau

Facile à mélanger

Mapelastic Turbo

Turbo-speed waterproofing

RAPID-SETTING

FOR WATERPROOFING AND CRACK ISOLATION

EASY MIXING

APPLY WITH ROLLER OR BRUSH

Mapelastic Turbo

Premium, Rapid-Drying, Waterproofing and Crack-Isolation Membrane

Mapelastic Turbo is a two-component, rapid-drying, cementitious-binder-based membrane with fine-grained selected aggregates, special admixtures and synthetic polymers in water dispersion for interior and exterior installations under ceramic tile or stone in residential, commercial and industrial intermittent wet or submerged environments. Applied easily with a roller or brush, Mapelastic Turbo provides an excellent barrier to protect adjacent rooms and floors below from water damage. Mapelastic Turbo exceeds ANSI A118.10 and ANSI A118.12 standards and is compatible with polymer-modified cement-based mortars (ANSI A118.4 or better) or epoxy mortars (ANSI A118.3).
  • For interior and exterior waterproofing and crack isolation
  • Rapid-setting: Tiling in as little as 90 minutes
  • Flood-test after 3 to 4 hours
  • Works on substrates where moisture is present up to 12 lbs. (5.44 kg) or 95% relative humidity (RH)
  • Pot life of greater than 45 minutes
  • Durable and flexible, bonding to a wide range of surfaces
  • Smooth consistency and flowable
  • Prevents in-plane floor cracks up to 1/8" (3 mm) from transmitting through tile and stone
  • Low-odor formulation; great for confined spaces

Documentation connexe

Fiche technique
Télécharger
Fiche de données de sécurité
Télécharger
Composés organiques volatils
Télécharger
Realtà