Back

MAPEI Flexcolor Design

Professional-Grade, Ready-to-Use Specialty Grout with Personalized Computer Color-Matching

MAPEI Flexcolor Design is a professional-grade, ready-to-use (RTU) specialty grout that allows you to “design your color,” any color.

MAPEI Flexcolor Design is formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface.

MAPEI Flexcolor Design is formulated with the latest innovation in recycled glass-bead aggregate that enhances cleanability and improves workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation.

This product is exclusively for National Brand Accounts and Commercial Projects. For complete information on samples and ordering, contact your local MAPEI architectural representative.

Stain- and chemical-resistant grout formulation with no sealing required
Easy cleanability, color consistency and improved workability
Dries to a hard, uniform color surface in 24 hours
65% or greater recycled content
Nonsag formulation for vertical backsplashes
UV-stable formulation
Crack-resistant and shrinkage-controlled formulation
Does not contribute to the development of efflorescence
BioBlock^® technology for mold and mildew resistance
Ready to use straight from the pail, with no water required
Also available in a “design” color from the list of fandecks below
Benjamin Moore
Sherwin Williams
Behr
Florida Paints
BASF Master Protect
Pantone
Federal Standards 595C
PPG
Glidden
RAL Colors
NCS-Natural Color System

HOW TO BUY

Calculate consumption

Tile specifications

Grout specifications

Area to be covered

Your project:

Tile Length

Tile Width

Tile Thickness

Grout Joint Width

Area to be grouted

Consumption:

Grouts require:

Product packaging available*:

*Packages available depending on colours

The calculation is based on the actual volume to be filled and the product density.

The provided data should be considered indicative and for estimation purposes only, as certain factors that may still affect the actual consumption cannot be considered (for example, tile roughness, excess residual product, surface irregularities, etc.).