Working-Time Extender for Grout Ultracolor Plus Extend is a liquid retarder additive to be added to the mix water for Ultracolor Plus FA or Ultracolor Plus Max when extra working time is needed. It…
Working-Time Extender for Grout Ultracolor Plus Extend is a liquid retarder…
Super Low-Viscosity, Epoxy Healer/Sealer Planiseal SLV is a solvent-free, two-component, 100%-solids, low-modulus, super low-viscosity, epoxy healer/sealer designed to penetrate into hairline cracks…
Super Low-Viscosity, Epoxy Healer/Sealer Planiseal SLV is a solvent-free,…
Safety Grid for Raised Floors on Pedestals PP level GRID System is used in combination with pedestals to offer an extra degree of safety and protection. In the unlikely event of pavers breaking, the…
Safety Grid for Raised Floors on Pedestals PP level GRID System is used in…
Two-Component, Clear, Matte, Aliphatic Polyurethane Coating Mapefloor Finish 59 W TRP [NA] provides a high-performance finish on general-service resinous Mapefloor systems flooring and Ultratop…
Finishing Spray Solution for Smoothing of Sealants UltraCare Smooth Silicone [NA] is a water-based, innovative spray solution suitable for silicone and urethane sealants as well as acrylic and latex…
Finishing Spray Solution for Smoothing of Sealants UltraCare Smooth Silicone…
Water-Based, Interior/Exterior Primer for Sheet Membranes MAPEI HM Primer is a ready-to-use, low-VOC, water-based, quick-drying, high-tack membrane primer. It is specifically formulated to promote…
Water-Based, Interior/Exterior Primer for Sheet Membranes MAPEI HM Primer is a…
Water-Based, Alkali-Resistant Primer for Elastocolor Coatings Elastocolor Primer AR is a specially designed primer for use on exterior, above-grade, new and previously coated concrete and masonry…
Water-Based, Alkali-Resistant Primer for Elastocolor Coatings Elastocolor…
Water-Based, High-Build, 100%-Acrylic, Waterproof Coating Elastocolor Coat is a water-based, high-build, 100%-acrylic coating designed to protect and decorate above-grade, exterior/interior vertical…
Unidirectional high-strength carbon fiber, glass fiber or basalt fiber cord for impregnation with MapeWrap 21 to make “structural connections” Structural and functional restoration of concrete…
Unidirectional high-strength carbon fiber, glass fiber or basalt fiber cord for impregnation with MapeWrap 21 to make “structural connections” Structural and functional restoration of concrete…
Premium, Lightweight Mortar with Polymer for Large and Heavy Tile MAPEI Ultralite Mortar is a premium-grade, lightweight, single-component mortar for large-and-heavy-tile and non-sag applications,…
Premium, Lightweight Mortar with Polymer for Large and Heavy Tile MAPEI…
Pure Zinc Galvanic Anode Mapeshield I is a pure zinc anode for cathodic protection of reinforcing steel against corrosion in new, reinforced structures as well as structures requiring repair.
Pure Zinc Galvanic Anode Mapeshield I is a pure zinc anode for cathodic…
Spray-Applied, Temporary, Protective Layer for Polyurethane Topcoats Marine Spray DSN is formulated to be used during the application of Mapedeck polyurethane systems. Applied by spray a few minutes…
Spray-Applied, Temporary, Protective Layer for Polyurethane Topcoats Marine…
Two-component, viscoelastic polyurethane base layer for levelling off internal and external decks on ships Mapedeck Flexiscreed is used to form a viscoelastic levelling layer before installing floor…
Two-component, viscoelastic polyurethane base layer for levelling off internal…
Two-component, self-levelling, fillerized aliphatic polyurethane base layer for levelling off internal and external decks on ships Mapedeck Ultrascreed is used to level off internal and external…
Two-component, self-levelling, fillerized aliphatic polyurethane base layer for…
Projoint DIL PAS is a load-bearing structural joint composed of two opposing L-shaped profiles in natural aluminum and an expanding part of interchangeable EPDM, available in black or gray. PAS/105…
Projoint DIL PAS is a load-bearing structural joint composed of two opposing…
Projoint DIL PBH is a load-bearing structural joint composed of two opposing L-shaped components in natural aluminum and an expanding part in interchangeable EPDM rubber available in black or gray. …
Projoint DIL PBH is a load-bearing structural joint composed of two opposing…
Projoint DIL PFFE is a load-bearing structural joint composed of two opposing profiles in natural aluminum and an expanding part (+/- 9/32" or 7 mm) in interchangeable plasticized PVC available in…
Projoint DIL PFFE is a load-bearing structural joint composed of two opposing…
![Mapefloor Finish 59 W TRP [NA]](https://cdnmedia.mapei.com/images/librariesprovider67/products-images/4_3008950-mapefloor-finish-59-w-trp-part-a-1-39gal_c6bc35783290471db7d462069a457e0b.png?sfvrsn=c5d85c6b_0)
![UltraCare Smooth Silicone [NA]](https://cdnmedia.mapei.com/images/librariesprovider67/products-images/4_3011019-ultracare-smooth-silicone-24oz_af7cbff0875e492fa9d048d4b2a0b85a.png?sfvrsn=8a200361_0)
