Video Library

Two-Component, Water-Based, Aliphatic, Anti-Slip, Polyurethane Finish for LVT Mapecoat 4 LVT [NA] is a transparent protective finish that comes in matte (10 gloss) and semi-gloss (30 gloss) for luxury vinyl tile (LVT) in addition to other resilient flooring in horizontal and vertical applications. It provides a non-slip finish with high resistance to wear in residential and commercial environments, including wet areas such as tub surrounds and shower enclosures as well as dry areas that are subject to high foot traffic.

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

Premium Waterproofing and Crack-Isolation Membrane Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.

High-Moisture-Resistant Skimcoat and Embossing Leveler Planiprep 4 LVT is a premixed, high-moisture-resistant, water-based, acrylic-resin-based skimcoat and embossing leveler.

Premium Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is non-sagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock ® technology to help protect against mold and mildew.

Premium, Unsanded Siliconized Acrylic Caulk Keracaulk U is a premium-grade, unsanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Premium, Sanded Siliconized Acrylic Caulk Keracaulk S is a premium-grade, sanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Professional, Hybrid-Polymer Adhesive for Resilient Flooring on Walls Ultrabond ECO MS 4 LVT Wall is a moisture-curing, one-component, thixotropic, silane-modified polymer adhesive specifically designed for the direct bonding of various resilient flooring types in both wall and floor installations.

Premium Sanded Grout with Polymer Keracolor S is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Universal Grout Colorant and Sealer UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, urethane and acrylic grouts.

Premium Tile Adhesive Type 1 is a premium-grade, traditional, nonflammable, acrylic adhesive for setting glazed and unglazed ceramic and porcelain tiles on walls, floors and countertops. This adhesive is used for interior applications only.

Quick-Setting, Fiber-Reinforced, Cementitious Rendering Mortar Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.

Premium Turf Seam Tape Ultrabond Turf Tape is a PET-based, spun-bonded, nonwoven fabric tape designed  specifically to work with MAPEI turf adhesives for seaming synthetic turf. Ultrabond Turf Tape is waterproof and provides superior tensile strength and tear resistance, which is vital for installations of professional athletic playing fields. It is also perfectly  suited as a seaming base for other synthetic turf applications, including installations  of residential landscaping, playgrounds and golf courses.

Premium, Fast-Setting, Urethane Adhesive for Turf Seams Ultrabond Turf PU 1K is a fast-setting, moisture-curing, one-component, urethane adhesive specifically designed for bonding of synthetic turf in high-performance sports installations. Offering excellent weather resistance, Ultrabond Turf PU 1K can be used in interior and exterior applications. It meets FIFA requirements for bond strength in sports-turf applications.

Two-Component, Water-Based, Aliphatic, Anti-Slip, Polyurethane Finish for LVT Mapecoat 4 LVT [NA] is a transparent protective finish that comes in matte (10 gloss) and semi-gloss (30 gloss) for luxury vinyl tile (LVT) in addition to other resilient flooring in horizontal and vertical applications. It provides a non-slip finish with high resistance to wear in residential and commercial environments, including wet areas such as tub surrounds and shower enclosures as well as dry areas that are subject to high foot traffic.

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

Premium Waterproofing and Crack-Isolation Membrane Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.

High-Moisture-Resistant Skimcoat and Embossing Leveler Planiprep 4 LVT is a premixed, high-moisture-resistant, water-based, acrylic-resin-based skimcoat and embossing leveler.

Premium Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is non-sagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock ® technology to help protect against mold and mildew.

Premium, Unsanded Siliconized Acrylic Caulk Keracaulk U is a premium-grade, unsanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Premium, Sanded Siliconized Acrylic Caulk Keracaulk S is a premium-grade, sanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Professional, Hybrid-Polymer Adhesive for Resilient Flooring on Walls Ultrabond ECO MS 4 LVT Wall is a moisture-curing, one-component, thixotropic, silane-modified polymer adhesive specifically designed for the direct bonding of various resilient flooring types in both wall and floor installations.

Two-Component, Water-Based, Aliphatic, Anti-Slip, Polyurethane Finish for LVT Mapecoat 4 LVT [NA] is a transparent protective finish that comes in matte (10 gloss) and semi-gloss (30 gloss) for luxury vinyl tile (LVT) in addition to other resilient flooring in horizontal and vertical applications. It provides a non-slip finish with high resistance to wear in residential and commercial environments, including wet areas such as tub surrounds and shower enclosures as well as dry areas that are subject to high foot traffic.

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

Premium Waterproofing and Crack-Isolation Membrane Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.

High-Moisture-Resistant Skimcoat and Embossing Leveler Planiprep 4 LVT is a premixed, high-moisture-resistant, water-based, acrylic-resin-based skimcoat and embossing leveler.

Premium Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is non-sagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock ® technology to help protect against mold and mildew.

Premium, Unsanded Siliconized Acrylic Caulk Keracaulk U is a premium-grade, unsanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Premium, Sanded Siliconized Acrylic Caulk Keracaulk S is a premium-grade, sanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Professional, Hybrid-Polymer Adhesive for Resilient Flooring on Walls Ultrabond ECO MS 4 LVT Wall is a moisture-curing, one-component, thixotropic, silane-modified polymer adhesive specifically designed for the direct bonding of various resilient flooring types in both wall and floor installations.

Waterproofing Sealing Tape for Mapeguard WP 200 Mapeguard WP ST is a fast and easy way to cover seams and wall upturns to provide waterproofing and vapor management protection when installing Mapeguard WP 200 waterproofing sheet membrane for ceramic tile and stone.

Pre-Formed Inside Corners Mapeguard PIC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric. It offers a fast and easy way to seal inside corners in wet areas where walls and floors meet, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Pre-Formed Outside Corners Mapeguard POC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric. It offers a fast and easy way to seal outside corners, curbs or return walls in wet areas where walls/curbs and floors meet, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Uncoupling, Crack-Isolation and Waterproofing Membrane Mapeguard UM 35 [NA] is an uncoupling, crack-isolation, waterproofing and vapor-management membrane made from high-density polyethylene (HDPE) with a rough surface and polypropylene fabric backing. Mapeguard UM 35 [NA] is designed for installing ceramic and stone tile, including over existing non-cushioned resilient flooring, ceramic tile and stone tile. It is designed to perform over challenging substrates, such as young concrete and single-layer 3/4" (19 mm) plywood subfloors with joist spacing of up to 19.2" (49 cm) on center.

Single-Component, 100%-Solids, Cold-Fluid-Applied, Structural Waterproofing Membrane Planiseal CR1 is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC-compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single-grade membrane can be used in horizontal as well as vertical applications, maximizing versatility. Planiseal CR1 can be applied by roller, brush, trowel or squeegee.

Two-Component, Water-Based, Aliphatic, Anti-Slip, Polyurethane Finish for LVT Mapecoat 4 LVT [NA] is a transparent protective finish that comes in matte (10 gloss) and semi-gloss (30 gloss) for luxury vinyl tile (LVT) in addition to other resilient flooring in horizontal and vertical applications. It provides a non-slip finish with high resistance to wear in residential and commercial environments, including wet areas such as tub surrounds and shower enclosures as well as dry areas that are subject to high foot traffic.

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

Premium Waterproofing and Crack-Isolation Membrane Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.

High-Moisture-Resistant Skimcoat and Embossing Leveler Planiprep 4 LVT is a premixed, high-moisture-resistant, water-based, acrylic-resin-based skimcoat and embossing leveler.

Premium Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is non-sagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock ® technology to help protect against mold and mildew.

Premium, Unsanded Siliconized Acrylic Caulk Keracaulk U is a premium-grade, unsanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Premium, Sanded Siliconized Acrylic Caulk Keracaulk S is a premium-grade, sanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Professional, Hybrid-Polymer Adhesive for Resilient Flooring on Walls Ultrabond ECO MS 4 LVT Wall is a moisture-curing, one-component, thixotropic, silane-modified polymer adhesive specifically designed for the direct bonding of various resilient flooring types in both wall and floor installations.

Low-VOC, Synthetic, Resin-Based Primer for Ultratop® Loft Toppings Primer Grip White [NA] is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in dispersion. It enhances the performance and adhesion of MAPEI’s Ultratop Loft toppings to existing ceramic tile and other difficult-to-bond-to substrates in vertical applications. Suitable for a wide variety of substrates, Primer Grip White [NA] combines excellent versatility with an easy, low-odor application.

Coarse-Textured, Cement-Based Micro-Topping Ultratop Loft F [NA] is a one-component, cement-based decorative topping that is troweled and applied in two layers 1/16" (1.5 mm) in thickness. It is specially formulated for abrasion resistance in designing non-uniform and non-homogeneous finishes with a broad range of coarse-textured finishing effects on indoor decorative surfaces. Ultratop Loft F [NA] can be used on a wide variety of substrates and combines excellent versatility with easy application.

Concentrated, Liquid Pigment Solution for Coloring Ultratop Loft Micro-Toppings Ultratop Easycolor [NA] is a one-component, concentrated, liquid pigment solution available in a broad range of hues. It is specially formulated to color MAPEI’s trowel-applied, cementitious micro-toppings Ultratop Loft F [NA] and Ultratop Loft W [NA].

Water-Based, Acrylic Primer for Ultratop® Loft Toppings Primer LT [NA] is a low-VOC, water-based acrylic primer that enhances the performance and adhesion between layers of Ultratop Loft toppings for walls and floors. Primer LT [NA] combines excellent versatility with easy, low-odor applications for indoor use.

Fine-Textured, Cement-Based Micro-Topping Ultratop Loft W [NA] is a one-component, cement-based decorative topping that is troweled and applied in two layers 1/16" (1.5 mm) in thickness. It is specially formulated for abrasion resistance in designing non-uniform and non-homogeneous finishes with a broad range of finishing effects on indoor decorative surfaces. Ultratop Loft W [NA] can be used on a wide variety of substrates and combines excellent versatility with easy application.

Universal Carpet Tile Adhesive Ultrabond ECO 811 is a high-performance, acrylic latex adhesive designed to provide an aggressive tack for installing all types of carpet tile. Ultrabond ECO 811 provides a secure, releasable adhesive base for standard PVC-backed carpet tile as well as for non-PVC-, polyolefin-, felt- and bituminous-backed carpet tile. It can also be used to bond fiberglass-reinforced vinyl sheet flooring.

Professional Carpet Adhesive Ultrabond ECO 185 is a latex-based adhesive that offers fast grab and quick leg development for the fast-track installation of commercial carpet. It can be used in direct-bond and double-stick carpet applications.

High-Performance, Moisture-Resistant, Indoor/Outdoor Carpet Adhesive Ultrabond ECO 420 is a proprietary, water-based adhesive formulation designed for both indoor and outdoor carpet. Ultrabond ECO 420 offers high-moisture-resistant characteristics and excellent bond properties for interior and exterior broadloom carpet installations. Ultrabond ECO 420 is also perfectly suited to bond reground rubber underlayments such as Mapesonic RM for ceramic tile installations. Due to its unique formulation, it can be installed without the need for moisture testing.

Premium, Lightweight Mortar with Polymer for Large and Heavy Tile MAPEI Ultralite Mortar is a premium-grade, lightweight, single-component thin-set mortar that can also be used for large-and-heavy-tile and non-sag applications. This high-performance, polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application, with Universal Color Formula™ for installing light-colored stones and translucent marble, and with BioBlock ® technology for mold and mildew resistance. MAPEI Ultralite Mortar utilizes Ultralite Technology™ for twice the coverage of a standard thin-set mortar per pound/kg and contains more than 20% recycled content.

Premium Unsanded Grout with Polymer Keracolor U is a premium-grade, pre-blended, polymer-modified unsanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/16" to 1/8" (1.5 to 3 mm).

Premium Sanded Grout with Polymer Keracolor S is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Premium epoxy mortar and grout Kerapoxy is a premium-grade, water-cleanable, 100%-solids, high-strength epoxy mortar and chemical-resistant nonsagging grout system. Available in all MAPEI colors for grouting, Kerapoxy is excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance.

100%-Solids, Industrial-Grade Epoxy Grout with Color-Coated Quartz Kerapoxy IEG CQ is a water-cleanable, 100%-solids epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, efflorescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little film residue during cleanup of excess grout with a grout float. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional floors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where highstrength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

Professional, Lightweight Mortar with Polymer for Large and Heavy Tile MAPEI Ultralite Mortar Pro is a professional-grade, lightweight, single-component thin-set mortar that can also be used for large-and-heavy-tile and non-sag applications. This polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application. MAPEI Ultralite Mortar Pro ’s unique Ultralite Technology™ provides twice the coverage of a standard thin-set mortar per pound/kg and contains more than 20% recycled content.

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

Polymer-Modified Thick-Bed and Render Mortar Modified Mortar Bed is a pre-blended, cement-based, polymer-modified thick-bed and render mortar that includes a blend of selected aggregates. Rather than requiring the use of a latex additive, it only needs mixing with water to produce a thick bed mortar of exceptional strength.

Premium Waterproofing and Crack-Isolation Membrane Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Premium, Rapid-Drying, Waterproofing and Crack-Isolation Membrane Mapelastic Turbo is a two-component, rapid-drying, cementitious-binder-based membrane with fine-grained selected aggregates, special admixtures and synthetic polymers in water dispersion for interior and exterior installations under ceramic tile or stone in residential, commercial and industrial intermittent wet or submerged environments. Applied easily with a roller or brush, Mapelastic Turbo provides an excellent barrier to protect adjacent rooms and floors below from water damage. Mapelastic Turbo exceeds ANSI A118.10 and ANSI A118.12 standards and is compatible with polymer-modified cement-based mortars (ANSI A118.4 or better) or epoxy mortars (ANSI A118.3).

Quick-Setting, Fiber-Reinforced, Cementitious Rendering Mortar Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.

Alkali-Resistant, Epoxy Moisture-Reduction Barrier Planiseal VS is an alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems with floor coverings. In addition, Planiseal VS expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA with DropEffect™ technology is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

Premium Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is non-sagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock ® technology to help protect against mold and mildew.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA with DropEffect™ technology is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

Multipurpose, Bond-Promoting Primer ECO Prim Grip is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in dispersion. It enhances the performance and adhesion of mortars to existing ceramics and difficult-to-bond-to substrates. Plus, it improves bonding of self-leveling underlayments (SLUs) and bonds of render coats over cementitious substrates. Suitable for a wide variety of substrates, ECO Prim Grip combines excellent versatility with an easy, low-odor application.

Calibrated, 20/40 Mesh Sand Mapesand Fine is a calibrated, washed and oven-dried, 20/40 mesh silica sand for use as an extender for Planitex™ SL gypsum self-leveling underlayment, and to improve the bond of resin and epoxy primers with self-leveling and topping compounds.

Calibrated, 16/30 Mesh Sand Mapesand Coarse is a calibrated, washed and oven-dried, 16/30 mesh silica sand for use with resin and epoxy primers to create texture, which is necessary  for the primer to bond with self-leveling and topping compounds.

Professional, Self-Leveling Underlayment Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix with a quicker curing time, for interior concrete and engineer-approved floors.

Moisture-Control Membrane, Adhesive Isolator, Sealer, pH Blocker and Primer Planiseal MSP is a two-coat, high-solids, polymer-based adhesive isolator, sealer, moisture-control membrane and self-leveling primer. Planiseal MSP protects flooring installations against subfloor moisture and pH in concrete slabs with moisture vapor emission rates (MVERs) up to 15 lbs. (6,80 kg) per ASTM F1896, relative humidity (RH) up to 99% per ASTM F2170 and alkalinity protection up to pH of 12. Planiseal MSP eliminates the need for a secondary primer for self-leveling applications.

High-Performance, Quick-Setting, Self-Leveling Underlayment Ultraplan 1 Plus is a quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

High-Performance, 100%-Solids Epoxy Primer Primer E is a two-component, 100%-solids epoxy primer and bonding agent designed for use with MAPEI self-leveling underlayments using MAPEI’s sand broadcast method. Primer E is the most effective method for bonding to nonporous, dense substrates before installing self-leveling underlayments subject to high stress. Primer E’ s low viscosity makes installation fast and easy, and provides excellent penetration into the substrate and therefore a tenacious bond.

Weather-Resistant, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan Extreme 2 is an advanced, hydraulic-cement-based, self-leveling compound designed for fast-track underlayment applications. It is especially formulated for leveling interior, horizontal concrete surfaces where environmental controls are not operational or the building is not enclosed. Once installed, Ultraplan Extreme 2 is not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing. Its high compressive strength is designed to allow it to be exposed to traffic as a temporary wear layer until the floor is covered with floor covering. Ultraplan Extreme 2 has no moisture vapor emission limitations and can be installed without testing on properly prepared concrete substrates. It is the self-leveling compound of choice for use under moisture-controlling adhesive systems and epoxy moisture barriers.

High-Flow, Fast-Setting, Self-Leveling, Liquid Skimcoat Ultraplan LSC is a super fluid, high-flow, calcium-aluminate-cement-based underlayment designed for thin-coat applications over large surfaces. Unique flow properties allow Ultraplan LSC to spread easily and quickly, potentially eliminating the need for hand-applied skimcoats. This product cures to a hard and flat surface that typically requires no further touchup or repair, accelerating floor-covering installation and reducing the need for additional patching or skimcoating materials.

All-Purpose Primer for Self-Leveling Underlayments Primer T is a low-VOC, magenta-colored, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments (SLUs) on nonporous and porous substrates. Suitable for a wide variety of substrates, Primer T combines excellent versatility with easy, low-odor application.

Advanced-Technology, Acrylic Latex Primer for Concrete Primer L is a concentrated, solvent-free acrylic primer used before the installation of underlayment materials. It is green for easy identification. Primer L improves the bond between a properly prepared and profiled concrete substrate, and self-leveling underlayment. Primer L can also be used as a primer for gypsum-based underlayments and patches.

Water-Based Epoxy Primer Primer WE is a two-component, polymer-modified, water-based epoxy primer for enhanced adhesion to nonporous substrates before the application of MAPEI self-leveling materials. It improves adhesion over smooth, nonabsorbent and difficult-to-bond-to substrates such as properly prepared glazed ceramic tile, epoxy moisture barriers, cement-based terrazzo, old cutback adhesive residue and approved plywood subfloors.

Ultra Low-Viscosity, Consolidating Epoxy Primer Primer CE is an ultra low-viscosity, two-component, 100%-solids surface-consolidating epoxy primer. Primer CE effectively penetrates and consolidates the surface of weak concrete or gypsum substrates. Applied in a single-coat application, Primer CE is designed to restore structural integrity to friable substrates such as weak gypsum-based underlayments or lightweight concretes before the application of underlayments, toppings or floor finishes. Once installed, Primer CE is compatible with a wide number of primers and adhesives typically used with flooring installations, such as with tile, vinyl composition tile (VCT), carpet, sheet vinyl, wood and other floor finishing products.

Two-Component, Filled, Epoxy Primer Primer SN is a two-component, filled, epoxy primer specifically designed to enhance adhesion of cement-based decorative and multilayer flooring, such as MAPEI’s Mapefloor products, Ultratop products, PlaniLevel products and Planitop EL .

Fiber-Reinforced, Gypsum Self-Leveling Underlayment Planitex SLF is a fiber-reinforced, gypsum-based, self-leveling underlayment with enhanced flexural strength. It resists cracking and provides an exceptionally smooth, hard surface for use in dry, interior residential and commercial areas. Planitex SLF provides an excellent substrate for a wide variety of floor coverings. Planitex SLF can also be used to cover radiant or in-floor heating systems.

Fast-Drying, Textured Primer for Nonporous Substrates Primer X is a fast-drying, high-performance, low-VOC, water-based, acrylic primer. It is textured to enhance the performance and adhesion of self-leveling underlayments over 100%-solids, epoxy moisture barriers and other nonporous substrates.

One-Component, Polyurethane Moisture Barrier and Bonding Agent Planiseal PMB is a one-component, moisture-curing, polyurethane compound designed to provide moisture vapor emission protection on damp concrete substrates in a single- or double-coat application method as well as a vapor retarder using a single-coat method over wood substrates. It also serves as a bonding agent and moisture barrier system for self-leveling underlayments when applied in a double-coat method with dry sand.

Quick-Setting, High-Compressive-Strength, Self-Leveling Underlayment Ultraplan M20 Plus is a calcium-aluminate-based, quick-setting, self-leveling underlayment and topping. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a high-compressive-strength underlayment with maximum resistance to wheel tracking and indentations. Ultraplan M20 Plus is suitable for use as a commercial wear topping in warehouse and alternate industrial applications where an exceptional flat and smooth concrete surface is desired.

Premium, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer Keraflex Super is a highly versatile, non-sag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone for installations on floors, walls and countertops. This polymer-modified mortar has a high content of a unique dry polymer, resulting in excellent adhesion to the substrate and tile, with enhanced resistance to freeze/thaw environments. It is formulated with Easy Glide Technology™ for ease of application and with a consistency that allows adjustability when used with lippage control systems. Keraflex Super can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.