Back

MAPEGUARD UM 35

Mapeguard UM 35 is the ideal solution to solve issues related to difficult substrates, while granting a successful installation of ceramics and stone material.

Waterproofing, uncoupling and anti-fracture membrane for cracked and damp substrates and substrates that are not fully cured before installing ceramic and stone tiles

Mapeguard UM 35 allows the control of cracks in the substrate, acting as an anti-fracture membrane and as an uncoupling element that prevents transmission of substrate cracks to the flooring.

Waterproofing properties Completely waterproof with the capacity to protect substrates from infiltrations of water and increase their durability. May be used on internal and external surfaces in combination with Mapeband Easy for sealing joints between the sheets and waterproofing critical areas (edges, cornes, etc). Vapour control Thanks to the air channels on the back of the membrane, the moisture in the underlying layers can evaporate; Mapeguard UM 35 is thus suitable for use on damp substrates and/or on substrates that are not fully cured, including in external surroundings.

Mechanical strength Mapeguard UM 35 allows the distribution of stresses also on floorings subject to heavy loads; it is certified as EXTRA HEAVY COMMERCIAL RATING according to TCNA test reports complying with ASTM C 627 and is suitable for use in residential and commercial surroundings.
Even heat distribution Mapeguard UM 35 guarantees that heat is distributed more evenly when applied on heated floors, including compact heated floors.

Transparency Mapeguard UM 35 is semitransparent and this allows to verify the correct distribution of the adhesive underneath, as well as to easily locate the presence of potential elements passing through surfaces (such as drains), thus making the cutting of the membrane easier. Improved Adhesion The special shape of the embosses offers a perfect mechanical bonding of the adhesive in order to obtain a high adhesion between the ceramic or stone covering and Mapeguard UM 35.

TECHNICAL DATA:
Length: 30 m.
Width: 1 m.
Application: see technical Data Sheet.
Packaging: 30 m rolls.

Mapeguard UM 35 is a membrane made from a layer of honeycomb HDPE with a rough surface and polypropylene fabric backing. These characteristics improve the bond strength of adhesive applied on both MAPEGUARD UM 35 Waterproofing, uncoupling and anti-fracture membrane for cracked and damp substrates and substrates that are not fully cured before installing ceramic and stone tiles sides of Mapeguard UM 35.