Project A7 Vöestbrücke Linz, Sanierung,


Yard	Sanierung der Vorlandbrücke LZ33 vor der A7 Voestbrücke über die Donau
Location	Austria
Subcategory	BRIDGE
Application	Produkte zur Betoninstandsetzung von MAPEI
Application Type	Concrete restoration systems
Client	ASFINAG
Contractor company	Chembau GmbH - Granit
Credits	Denise Frunza
MAPEI Coordination	Peter Panzl

ADDITIX PE

Admixture to make epoxy and polyurethane products thicker with a thixotropic consistency. TECHNICAL DATA: Appearance: powder. Colour: white. Density: 960 kg/m³. Consumption: 1.5-5% by weight on the…

Admixture to make epoxy and polyurethane products thicker with a thixotropic…

Elastocolor Paint

Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Elastomeric, crack-bridging, permanently flexible, protective paint with high…

ELASTOCOLOR PRIMER

Solvent-based fixing primer with high penetration properties for porous substrates and curing agent for repair mortars. Elastocolor Primer is used to impregnate concrete surfaces repaired with…

Solvent-based fixing primer with high penetration properties for porous…

LAMPOCEM

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder. TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of LAMPOCEM with 20-21 parts of water.…

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEFINISH

Two-component cementitious mortar for finishing concrete surfaces. Mapefinish is used to level small imperfections of poured concrete and to smooth surfaces after repairs. Mapefinish is suitable for…

Two-component cementitious mortar for finishing concrete surfaces. Mapefinish…

MAPEGROUT 430

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

Mapegrout Thixotropic

Controlled-shrinkage fibre-reinforced mortar for the repair of concrete. Use Mapegrout Thixotropic for all concrete repairs such as: reconstruction of concrete cover, repairs of corners, beams,…

Controlled-shrinkage fibre-reinforced mortar for the repair of concrete. Use…

PLANITOP FINE FINISH

Ultra fine textured skimming mortar for concrete; recommended for exposed finish surfaces. TECHNICAL DATA: Maximum size of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP FINE FINISH with…

Ultra fine textured skimming mortar for concrete; recommended for exposed…

PLANITOP SMOOTH & REPAIR R4

Structural R4-class, rapid-setting, shrinkagecompensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete

Structural R4-class, rapid-setting, shrinkagecompensated, thixotropic,…