Project Aquaticum Debrecen Spa, Debrecen


Yard	Installation of ceramic tiles and waterproofing in pools, resilient installation work on the stairs, MAPECOAT TNS URBAN near the pool.
Location	Debrecen, Hungary
Subcategory	Spa
Application	Installation of ceramic tiles, waterproofing, resilient line.
Start and finish date	2019/2020
Application Type	Products for sports flooring, Waterproofing systems
Client	Debrecen City Council
Contractor company	Hunép Zrt.
MAPEI Distributor	GSV Kft.
Credits	Mário Bere
MAPEI Coordination	Krisztián Szénás

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

ELASTOCOLOR WATERPROOF

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water. TECHNICAL DATA: Consistency: thick liquid. Colour: colours from the colour chart range…

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.

Two-component, high-performance, highly-deformable, quick-setting and drying…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPEBAND EASY

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems

Rubber tape sandwiched between two layers of non-woven fabric to form elastic…

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of…

TPE tape for flexible sealing and waterproofing of expansion joints and cracks…

MAPEFLEX MS45

Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…

Paintable hybrid sealant and adhesive with a high modulus of elasticity also…

MAPEGROUT 430

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPELASTIC

Two-component, flexible cementitious waterproofing mortar for waterproofing balconies, terraces, bathrooms, swimming pools and damp environments.

Two-component, flexible cementitious waterproofing mortar for waterproofing…

MAPELASTIC TURBO

Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry. TECHNICAL DATA: Consistency of…

Two-component rapid-drying elastic cementitious mortar for waterproofing…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLASTIMUL 2K PLUS

Two-component, solvent-free, quick-drying, low-shrinkage, high flexibility bitumen waterproofing emulsion containing cellulose fibres. TECHNICAL DATA: Consistency: paste Density: 1.1 g/cm³. pH: 10.…

Two-component, solvent-free, quick-drying, low-shrinkage, high flexibility…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

TRIBLOCK P

Three-component, epoxy-cementitious primer for waterproofing damp substrates, including non-absorbent ones. Where to use: Triblock P is used as a waterproofing system for damp substrates, especially:…

Three-component, epoxy-cementitious primer for waterproofing damp substrates,…

ULTRACOLOR PLUS ZERO

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…