Project Bridge on Adige River, Masi

Bridge on Adige River

Masi, Italy

Ref #: 3500

Category: INFRASTRUCTURES


Yard	Bridge restoration
Location	Masi, Italy
Subcategory	BRIDGE
Built in	2003
Opened in	2004
Application	Restoration and consolidation of concrete structures with FRP fabrics
Application Type	Concrete restoration systems
Contractor company	Coesil srl
Installer companies	Coesil srl
Architects	TK Ingegneria Milano
Credits	Vito Pedretti - Mapei SpA
Project Manager	Dr. Ing. Silvio Collazuol

Product used for the project

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

Thixotropic epoxy adhesive with extended workability. Adesilex PG2 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives. Adesilex PG2 is…

Thixotropic epoxy adhesive with extended workability. Adesilex PG2 is a…

DURESIL EB

Two-component, anti-acid epoxy paint modified with hydro-carbide resin for protecting concrete and steel surfaces. TECHNICAL DATA: Consistency: component A fluid paste, component B fluid paste.…

Two-component, anti-acid epoxy paint modified with hydro-carbide resin for…

MAPEFLUID N100

Superplasticizer admixture with mild retarding action Where to use Mapefluid N100 is especially suitable for all applications which require a retarded rate of cement hydration at early ages. Its…

Superplasticizer admixture with mild retarding action Where to use Mapefluid…

Mapegrout Hi-Flow

Controlled-shrinkage fibre-reinforced fluid mortar for concrete repair. Use Mapegrout Hi-Flow for the repair of very damaged concrete structures where the use of fluid mortars is recommended. Made of…

Controlled-shrinkage fibre-reinforced fluid mortar for concrete repair. Use…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP C BI-AX

Balanced, high-strength, bi-directional carbon fibre fabric. TECHNICAL DATA: Weight: 230-360 g/m². Equivalent thickness of dry fabric: 0.064-0.10 mm. Tensile strength: > 4.800 MPa. Tensile modulus of…

Balanced, high-strength, bi-directional carbon fibre fabric. TECHNICAL DATA:…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

PLANITOP 200

One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to smooth…

One-component cementitious mortar with high bonding strength for interior and…