Project Bulgaria Hotel, Burgas


Yard	interior and exterior
Location	Burgas, Bulgaria
Subcategory	HOTEL/INN
Built in	2019
Opened in	2020
Application	floor leveling, structural strenghtening, facades renovation, ceramic installation
Start and finish date	2019/2020
Application Type	Facade interventions, Floor/wall covering, Tile & stone installation systems
Client	Hotel Bulgaria management
Contractor company	SMK Invictus
Installer companies	SMK Invictus, Skarlevi Engineering
Project Manager	Georgi Papazov

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPELASTIC

Two-component, flexible cementitious waterproofing mortar for waterproofing balconies, terraces, bathrooms, swimming pools and damp environments.

Two-component, flexible cementitious waterproofing mortar for waterproofing…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPETHERM NET

Glass fibre mesh resistant to alkalis, used for reinforcing smoothing and levelling layers to repair facades and for Mapetherm thermal insulation systems. This product helps the smoothing and…

Glass fibre mesh resistant to alkalis, used for reinforcing smoothing and…

PLANISEAL 288

Flexible, cementitious mortar for waterproofing. (Formerly known as Idrosilex 2K)

Flexible, cementitious mortar for waterproofing. (Formerly known as Idrosilex…

PLANISEAL 88 (Former Idrosilex Pronto)

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h.…

Osmotic cementitious mortar suitable for contact with drinking water, for…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

RESFOAM 1KM

One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…

One-component, ultra-fluid polyurethane resin applied by injection for…

ULTRACOLOR PLUS ZERO

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…