Project Coppedè Condominium, Rome


Yard	restoration of façades
Location	Rome, Italy
Subcategory	CONDOMINIUM
Built in	2009
Opened in	2010
Application	façades restoration and painting
Application Type	Masonry restoration
Client	Soprintendenza del Comune di Roma
Contractor company	Si. Re. Co. srl
Architects	arch. Antonio Zonfrillo
Credits	Corrado Villa Presutti

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

ANTIPLUVIOL S

Transparent siloxane resin-based water-repellent compound. Use Antipluviol S for the protection of vertical or inclined surfaces (façades) made of concrete, cementitious render, bricks and natural…

Transparent siloxane resin-based water-repellent compound. Use Antipluviol S…

CONSOLIDANTE 8020

Reversible consolidating product in solvent for the conservative restoration and consolidation of porous stone substrates, lime render and layers of paint. TECHNICAL DATA: Consistency: colourless…

Reversible consolidating product in solvent for the conservative restoration…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.

Two-component, high-performance, highly-deformable, quick-setting and drying…

EPOJET LV

Epojet LV is a two-component epoxy resin with a very low viscosity for injection into micro-cracks, also on wet surfaces.

Epojet LV is a two-component epoxy resin with a very low viscosity for…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPE-ANTIQUE FC

Cement-free lim- and Eco-Pozzolan-based fine mortars, respectively light-coloured and light pink, for finishing dehumidifying mortars applied on stone, brick and tuff masonry. Mape-Antique FC is a…

Cement-free lim- and Eco-Pozzolan-based fine mortars, respectively…

Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for consolidating, by injection, stone, brick work and tuff structures. Mape-Antique I is a pre-blended sulphate-resistant binder…

Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for…

MAPE-ANTIQUE MC

Pre-packed, cement-free, light coloured dehumidifying lime- and Eco-Pozzolan-based mortar for the restoration of damp stone, brick and tuff masonry. Mape-Antique MC is especially recommended for the…

Pre-packed, cement-free, light coloured dehumidifying lime- and…

MAPE-ANTIQUE RINZAFFO

Light-coloured salt-resistant cement-free pre-packed lime- and Eco-Pozzolan-based mortar to be used before applying Mape-Antique MC, Mape-Antique CC and Mape-Antique LC, dehumidifying mortars on…

Light-coloured salt-resistant cement-free pre-packed lime- and…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

SILANCOLOR CLEANER PLUS

Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water.…

Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid…

ULTRACOLOR PLUS ZERO

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…