Project Corona Hotel, San Giovanni Rotondo


Yard	hotel restoration
Location	San Giovanni Rotondo, Italy
Subcategory	HOTEL/INN
Built in	2010
Opened in	2012
Application	global interior and exterior hotel restoration
Application Type	Facade interventions
Client	Co. Mant sas
Contractor company	La nUova Edilizia srl
Installer companies	La Nuova Edilizia srl
Specialists involved	ing. Pasquale Cafaro
MAPEI Distributor	Savino srl

ANTIPLUVIOL S

Transparent siloxane resin-based water-repellent compound. Use Antipluviol S for the protection of vertical or inclined surfaces (façades) made of concrete, cementitious render, bricks and natural…

Transparent siloxane resin-based water-repellent compound. Use Antipluviol S…

CARBOPLATE

Pultruded carbon fibre plate with a protective plastic film on both faces. TECHNICAL DATA: Modulus of elasticity: 170 - 200 - 250 GPa. Fibre content: 68% - 68% - 65%. Thickness: 1.4 mm. Width: 50,…

Pultruded carbon fibre plate with a protective plastic film on both faces.…

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

KERACOLOR SF

Super fine, high performance cementitious grout for joints up to 4 mm.

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material

High-performance cementitious adhesive with no vertical slip and extended open…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPECOAT I 600W

Two-component transparent epoxy primer in water dispersion for epoxy flooring application.

Two-component transparent epoxy primer in water dispersion for epoxy flooring…

MAPEFLEX MS45

Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…

Paintable hybrid sealant and adhesive with a high modulus of elasticity also…

MAPELASTIC

Two-component, flexible cementitious waterproofing mortar for waterproofing balconies, terraces, bathrooms, swimming pools and damp environments.

Two-component, flexible cementitious waterproofing mortar for waterproofing…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

NIVOPLAN

Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…

Smoothing mortar for internal and external walls and ceilings for thicknesses…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PLANITOP 200

One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to smooth…

One-component cementitious mortar with high bonding strength for interior and…

POROCOL

Cementitious adhesive mortar for expanded block masonry. TECHNICAL DATA: Maximum diameter of aggregate: 1 mm. Mixing ratio: 100 parts of POROCOL with 23-25 parts of water. Pot life of mix:…

Cementitious adhesive mortar for expanded block masonry. TECHNICAL DATA:…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

SILANCOLOR BASE COAT

Water-repellent, coloured siloxane undercoat with a smooth finish and good filling properties for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…

Water-repellent, coloured siloxane undercoat with a smooth finish and good…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…