Project Hap Seng Business Park, Shah Alam

Hap Seng Business Park

Shah Alam, Malaysia

Ref #: 60000074

Category: COMMERCIAL FACILITIES


Yard	exterior floors, interior floors, basement carparks, bathrooms, planter boxes, water feature
Location	Shah Alam, Malaysia
Subcategory	VARIOUS
Built in	2020
Opened in	2020
Application	Waterproofing Solutions for Commercial Buildings
Start and finish date	2018/2020
Application Type	Waterproofing systems
Client	Hap Seng Land Sdn Bhd
Contractor company	Nakano Construction Sdn Bhd
Installer companies	Monarch CC Sdn Bhd
Architects	Asima Archirect Sdn Bhd
MAPEI Coordination	Aaron Ang

Product used for the project

IDROCRETE WP

High-performance, hydrophobic, pore-blocking, integral waterproofing admixture for concrete

High-performance, hydrophobic, pore-blocking, integral waterproofing admixture…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPELASTIC

Two-component, flexible cementitious waterproofing mortar for waterproofing balconies, terraces, bathrooms, swimming pools and damp environments.

Two-component, flexible cementitious waterproofing mortar for waterproofing…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL…

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PLASTIMUL MY

All-purpose, bituminous emulsion coating TECHNICAL CHARACTERISTICS Plastimul MY is a water-emulsified, thixotropic, bituminous coating which dries to form a flexible, plastic membrane that is…

All-purpose, bituminous emulsion coating TECHNICAL CHARACTERISTICS Plastimul MY…

PRIMER 3296

Aqueous acrylic primer with excellent penetration effect for dusty screeds. Where to use: Consolidation of unsound substrates. Preparation of unsound screed surfaces before the installation of wooden…

Aqueous acrylic primer with excellent penetration effect for dusty screeds.…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PURTOP 1000

Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site. TECHNICAL DATA: A/B ratio (by volume):…

Two-component, solvent-free, pure polyurea membrane applied by spray with a…