Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…
Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…
Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems…
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix:…
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…
Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…
Closed cell polyethylene foam cord for the correct sizing of movement joints.…
One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to smooth…
One-component cementitious mortar with high bonding strength for interior and…
Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…
Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…