Project S. Alfonso Church and Convent, Agrigento


Yard	Walls consolidation
Location	Agrigento, Italy
Subcategory	CHURCH
Built in	2008
Opened in	2009
Application	Vaults restoration and consolidation
Application Type	Masonry restoration
Contractor company	Cobar srl
Installer companies	S.E.I.
Architects	Ing. Linetti
Project Manager	Ing. Susanna Gara

ANTIPLUVIOL S

Transparent siloxane resin-based water-repellent compound. Use Antipluviol S for the protection of vertical or inclined surfaces (façades) made of concrete, cementitious render, bricks and natural…

Transparent siloxane resin-based water-repellent compound. Use Antipluviol S…

EPOJET LV

Epojet LV is a two-component epoxy resin with a very low viscosity for injection into micro-cracks, also on wet surfaces.

Epojet LV is a two-component epoxy resin with a very low viscosity for…

Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for consolidating, by injection, stone, brick work and tuff structures. Mape-Antique I is a pre-blended sulphate-resistant binder…

Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for…

MAPEWOOD PASTE 140

Thixotropic epoxy adhesive for restoring wooden structural elements. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 2 : 1. Workability time: 1 hour. Setting time: 4-5 hours. Final hardening time:…

Thixotropic epoxy adhesive for restoring wooden structural elements. TECHNICAL…

MAPEWRAP 12

Slow setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 12 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 12 is used…

Slow setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap…

MAPEWRAP 21

Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the “damp system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

PLANITOP HDM MAXI

Two-component, high-ductility cementitious mortar with a pozzolanic-reaction binder base, applied at a maximum thickness of 25 mm, for levelling off stone, brick and tuff substrates before laying…

Two-component, high-ductility cementitious mortar with a pozzolanic-reaction…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…