Project S.Anna ex-Monastery, Trapani


Yard	Consolidation
Location	Trapani, Italy
Subcategory	PLACE OF WORSHIP
Built in	2005
Opened in	2006
Application	Concrete structures consolidation with FRP System
Application Type	Concrete restoration systems
Contractor company	Colem srl Geom. Farina
Architects	Arch. Mauro Ceci
MAPEI Distributor	Edilagricola srl
Credits	Francesco Guasto
Project Manager	Arch. Mauro Ceci

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

CARBOPLATE

Pultruded carbon fibre plate with a protective plastic film on both faces. TECHNICAL DATA: Modulus of elasticity: 170 - 200 - 250 GPa. Fibre content: 68% - 68% - 65%. Thickness: 1.4 mm. Width: 50,…

Pultruded carbon fibre plate with a protective plastic film on both faces.…

Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for consolidating, by injection, stone, brick work and tuff structures. Mape-Antique I is a pre-blended sulphate-resistant binder…

Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for…

MAPE-ANTIQUE MC

Pre-packed, cement-free, light coloured dehumidifying lime- and Eco-Pozzolan-based mortar for the restoration of damp stone, brick and tuff masonry. Mape-Antique MC is especially recommended for the…

Pre-packed, cement-free, light coloured dehumidifying lime- and…

MAPE-ANTIQUE RINZAFFO

Light-coloured salt-resistant cement-free pre-packed lime- and Eco-Pozzolan-based mortar to be used before applying Mape-Antique MC, Mape-Antique CC and Mape-Antique LC, dehumidifying mortars on…

Light-coloured salt-resistant cement-free pre-packed lime- and…

MAPEFER

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix:…

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 21

Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the “damp system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP C BI-AX

Balanced, high-strength, bi-directional carbon fibre fabric. TECHNICAL DATA: Weight: 230-360 g/m². Equivalent thickness of dry fabric: 0.064-0.10 mm. Tensile strength: > 4.800 MPa. Tensile modulus of…

Balanced, high-strength, bi-directional carbon fibre fabric. TECHNICAL DATA:…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…