Project S.Bernardo Church, Cassina Nuova di Bollate


Yard	New flooring
Location	Cassina Nuova di Bollate, Italy
Subcategory	CHURCH
Built in	2005
Opened in	2005
Application	New resin and cement-based flooring realization
Application Type	Installation of floors
Contractor company	Edil-Co-Ri snc - Geom. S. Garattini
Installer companies	Resin Floor (A. Ormelli)
Credits	Giovanna Novella (Mapei SpA); Gianni Dal Magro
Project Manager	Don Mario Mascheroni

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

MAPE-ANTIQUE MC

Pre-packed, cement-free, light coloured dehumidifying lime- and Eco-Pozzolan-based mortar for the restoration of damp stone, brick and tuff masonry. Mape-Antique MC is especially recommended for the…

Pre-packed, cement-free, light coloured dehumidifying lime- and…

MAPE-ANTIQUE RINZAFFO

Light-coloured salt-resistant cement-free pre-packed lime- and Eco-Pozzolan-based mortar to be used before applying Mape-Antique MC, Mape-Antique CC and Mape-Antique LC, dehumidifying mortars on…

Light-coloured salt-resistant cement-free pre-packed lime- and…

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 21

Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the “damp system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…