Products for building

The only way of creating a durable, sustainable structure is to think in terms of systems rather than products.
This is why, year in year our, we create cutting-edge systems and materials to give you the opportunity of tackling the issue of the durability of structures and infrastructures from a new point of view.

Products for building

Select a product category

Accessory products

Admixtures for mortars and concrete

Anchoring with expansive mortars and fixing with rapid setting binders

Anti-graffiti treatments

Asbestos cement treatment

Bonding and smoothing cellular bricks and expansive blocks

Concrete structural reinforcement with carbon and glass fibre plates and fabrics

Consolidating masonry

Dehumidifying masonries with mortars and binders for renders

Elastic bonding and sealing

Form release agents and curing agents

Galvanic cathodic protection

Highway Maintenance

Horizontal chemical barriers

Joining PVC pipes

Levelling screeds, substrates and existing flooring

Lime-based transpirant renders

Medium strength (40 MPa), shrinkage compensated, fiber-reinforced, thixotropic mortar for repairing concrete

Primers for substrate preparation

Protecting and decorating concrete and renders

Protecting reinforcement rods

Reinforcing and protecting industrial flooring

Repairing concrete with mortars and controlled-shrinkage binders

Repairing cracked concrete by injectiong casting

Repairing sewerage systems with cementitious mortars, adhesives and grouts

Reparing concrete with mortars and controlled-shrinkage binders

Restoring wooden structures with primer and epoxy adhesives

Screeding and substrate preparation

Sealing and waterproofing expansion and construction joints

Smoothing concrete surfaces and renders

Structural bonding with epoxy resins

Structural polypropylene fibres for high performance Shotcrete

Thermal insulation

Waterproofing

EPOJET

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…

EPOJET LV

Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A :…

Two-component epoxy resin with a very low viscosity for injecting into…

EPOJET LV 40 IN

Two-component epoxy resin, with very low viscosity for injection in microcracks, also on wet surfaces

Two-component epoxy resin, with very low viscosity for injection in…

EPOJET SE

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

FOAMJET F

Ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject…

Ultra rapid setting two-component polyurethane resin with fluid consistency, to…

FOAMJET T

High viscosity ultra rapid setting two-component polyurethane resin, to be injected for consolidating and waterproofing of structures subject to…

High viscosity ultra rapid setting two-component polyurethane resin, to be…

STABILCEM

Expansive, super-fluid cementitious binder for mixing injection slurry, mortar and concrete. TECHNICAL DATA: Mixing ratio: – injection slurry: 100…

Expansive, super-fluid cementitious binder for mixing injection slurry, mortar…

STABILCEM ARS

High-strength, cementitious sulphate binder for making fluid slurry and/or super-fluid injection mortar. Stabilcem ARS is used for making fluid…

High-strength, cementitious sulphate binder for making fluid slurry and/or…

Innovation and quality for the building industry

The line is made up of numerous products, including mortars for repairing, skimming and protecting concrete, epoxy mortars and systems for structural bonds, products for crack injection and products for making anchor points.