Products for building

The only way of creating a durable, sustainable structure is to think in terms of systems rather than products.
This is why, year in year our, we create cutting-edge systems and materials to give you the opportunity of tackling the issue of the durability of structures and infrastructures from a new point of view.

Products for building

Select a product category

Accessory products

Admixtures for mortars and concrete

Anchoring with expansive mortars and fixing with rapid setting binders

Anti-graffiti treatments

Asbestos cement treatment

Bonding and smoothing cellular bricks and expansive blocks

Concrete structural reinforcement with carbon and glass fibre plates and fabrics

Consolidating masonry

Dehumidifying masonries with mortars and binders for renders

Elastic bonding and sealing

Form release agents and curing agents

Galvanic cathodic protection

Highway Maintenance

Horizontal chemical barriers

Joining PVC pipes

Levelling screeds, substrates and existing flooring

Lime-based transpirant renders

Medium strength (40 MPa), shrinkage compensated, fiber-reinforced, thixotropic mortar for repairing concrete

Primers for substrate preparation

Protecting and decorating concrete and renders

Protecting reinforcement rods

Reinforcing and protecting industrial flooring

Repairing concrete with mortars and controlled-shrinkage binders

Repairing cracked concrete by injectiong casting

Repairing sewerage systems with cementitious mortars, adhesives and grouts

Reparing concrete with mortars and controlled-shrinkage binders

Restoring wooden structures with primer and epoxy adhesives

Screeding and substrate preparation

Sealing and waterproofing expansion and construction joints

Smoothing concrete surfaces and renders

Structural bonding with epoxy resins

Structural polypropylene fibres for high performance Shotcrete

Thermal insulation

Waterproofing

AQUAFLEX ROOF

Ready-to-use flexible liquid membrane with fibres for continuous waterproofing layers on exposed external surfaces. TECHNICAL DATA: Consistency:…

Ready-to-use flexible liquid membrane with fibres for continuous waterproofing…

AQUAFLEX SYSTEM

Permanent encapsulation of asbestos cement. Use Aquaflex System cycle for the permanent encapsulation of type A (external view), B (internal view)…

Permanent encapsulation of asbestos cement. Use Aquaflex System cycle for the…

ELASTOCOLOR WATERPROOF

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water. TECHNICAL DATA: Consistency: thick…

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in…

FOAMJET F

Ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject…

Ultra rapid setting two-component polyurethane resin with fluid consistency, to…

FOAMJET T

High viscosity ultra rapid setting two-component polyurethane resin, to be injected for consolidating and waterproofing of structures subject to…

High viscosity ultra rapid setting two-component polyurethane resin, to be…

IDROSILEX

Bulk powder or liquid water-repellent for cementitious mortar. TECHNICAL DATA: Consistency: powder or liquid. Pot life of mix: approximately 1 hour.…

Bulk powder or liquid water-repellent for cementitious mortar. TECHNICAL DATA:…

IDROSILEX PRONTO

IDROSILEX PRONTO - Technical Sheet & Specifications Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry…

IDROSILEX PRONTO - Technical Sheet & Specifications Osmotic cementitious mortar…

ISAMITE

Bitumen paint in solvent. TECHNICAL DATA: Consistency: fluid. Colour: black. Density (g/cm³): 100. Dry solids content (%): approx. 50. Dust dry:…

Bitumen paint in solvent. TECHNICAL DATA: Consistency: fluid. Colour: black.…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C:…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPEGEL 50

Three-component hydrophilic gel for consolidating the ground and for injecting concrete barriers. TECHNICAL DATA: Consistency: comp A (liquid), comp…

Three-component hydrophilic gel for consolidating the ground and for injecting…

MAPEGEL UTT SYSTEM

Three-component flexible hydrophilic gel for waterproofing injection in underground structures

Three-component flexible hydrophilic gel for waterproofing injection in…

MAPEGUM EPX / MAPEGUM EPX-T

Two-component epoxy-polyurethane resin used to form flexible waterproof and chemical-resistant coats before bonding ceramic. TECHNICAL DATA:…

Two-component epoxy-polyurethane resin used to form flexible waterproof and…

MAPEGUM PU 1K

One-component, solvent-free, flexible polyurethane membrane for flexible waterproofing coats and bonds for new ceramic floors on new and old…

One-component, solvent-free, flexible polyurethane membrane for flexible…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPEI PLANICRETE SBR

Synthetic rubber latex based multipurpose polymer for waterproofing and repairs

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix:…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA:…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging> 2 mm), applied by trowel or with a roller, for waterproofing balconies,…

Two-component, high-flexibility cementitious mortar (with crack-bridging> 2…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEPROOF

Bentonite waterproofing sheets for structures below ground level, suitable for both horizontal and vertical surfaces. TECHNICAL DATA: Lower layer of…

Bentonite waterproofing sheets for structures below ground level, suitable for…

MAPEPROOF SWELL

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using an extrusion pistol. TECHNICAL DATA: Consistency: thixotropic paste.…

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

MONOLASTIC

One-component cementitious waterproofing mortar. TECHNICAL DATA: Consistency of mix: plastic-trowable. Dry solids content: 100%. Classification: EN…

One-component cementitious waterproofing mortar. TECHNICAL DATA: Consistency of…

MONOLASTIC ULTRA

One component, highly-flexible cementitious mortar for waterproofing concrete, balconies, terraces, bathrooms and swimming pools. Monolastic Ultra is…

One component, highly-flexible cementitious mortar for waterproofing concrete,…

PLANICRETE SP

MULTIPURPOSE LATEX ADDITIVE FOR MORTAR AND CEMENT-MORTAR ADHESIVE

PLANISEAL 288

Flexible, cementitious mortar for waterproofing. (Formerly known as Idrosilex 2K)

Flexible, cementitious mortar for waterproofing. (Formerly known as Idrosilex…

PLASTIMUL

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA: Consistency: thick paste. Density: 1.2 g/cm³. pH: 10. Dry solids content:…

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA:…

PLASTIMUL 1K SUPER PLUS

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high flexibility bitumen waterproofing emulsion containing polystyrene spheres…

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high…

PLASTIMUL 2K PLUS

Two-component, solvent-free, quick-drying, low-shrinkage, high flexibility bitumen waterproofing emulsion containing cellulose fibres. TECHNICAL…

Two-component, solvent-free, quick-drying, low-shrinkage, high flexibility…

PLASTIMUL 2K SUPER

Two-component, solvent-free, low-shrinkage, high yield, high-flexibility bitumen waterproofing emulsion containing polystyrene spheres. TECHNICAL…

Two-component, solvent-free, low-shrinkage, high yield, high-flexibility…

PLASTIMUL FIBER

Emulsione bituminosa fibrorinforzata impermeabilizzante di uso generale

PLASTIMUL PRIMER

Solvent-free, bitumen primer for treating substrates before applying waterproofing products from the PLASTIMUL range. TECHNICAL DATA: Consistency:…

Solvent-free, bitumen primer for treating substrates before applying…

PURTOP 1000

Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly…

Two-component, solvent-free, pure polyurea membrane applied by spray with a…

PURTOP EASY

One-component, elastic polyurethane waterproofing membrane.

TRIBLOCK FINISH

Three-component, epoxy-cementitious mortar for smoothing damp substrates. TECHNICAL DATA: Maximum dimension of aggregate: 0.25 mm. Mixing ratio:…

Three-component, epoxy-cementitious mortar for smoothing damp substrates.…

TRIBLOCK P

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates. TECHNICAL DATA: Consistency: comp. A liquid; comp. B…

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp…

Innovation and quality for the building industry

The line is made up of numerous products, including mortars for repairing, skimming and protecting concrete, epoxy mortars and systems for structural bonds, products for crack injection and products for making anchor points.