MAPEFLOOR I 390 EDF
Two-component, self-levelling epoxy formulate for high strength, dissipative coatings.
Mixing ratio: comp. A : comp. B = 80 : 20 by weight.
Colour of mix: neutral.
Consistency of mix: fluid.
Density of mix (kg/m³): 1,420.
Viscosity of mix (Pa·s): 1.5-2.5 (# 3 - 20 rpm).
Workability time: approx. 40 min. at +10°C; approx 25 min. at +20°C; approx 15 min. at +30°C.
Set to foot traffic: approx. 30 h at +10°C; approx 24 h at +20°C; approx 16 h at +30°C.
Electrical resistance (EN 1081) (Ohm): 104these values may vary according to surrounding conditions (temperature and humidity) and the equipment used to take the readings.
Compressive strength after 28 days at +23°C (EN 196-1) (N/mm²): approx. 80 (MAPEFLOOR I 390 EDF without fillers).
Flexural strength after 28 days at +23°C (EN 196-1) (N/mm²): approx. 40 (MAPEFLOOR I 390 EDF without fillers).
Abrasion resistance - Taber abrasion meter (CS17 disk - 1,000 revs. - 1,000 g) after 7 days at +23°C (DIN 53109) (mg): 70.
Shore D hardness after 3 days at +23°C (DIN 53505): 77.
Adhesion to concrete (ISO 4624) (N/mm²): ≥ 1.5 (failure of concrete).
Storage: 24 months in its original packaging in a dry place at a temperature of between +5°C and +30°C.
Consumption: max. 2.5 kg/m².
Packaging: 20 kg kit (A + B).